Operation Manual
- 24 -
- 24 -
7.8 Selecting locked channels
If you select a locked channel, you will only see the chan-
nel name with a key symbol. By entering the password, you
can activate locked channels until the next time the device is
switched off (see also page 22, chapter “Undoing the chan-
nel lock”).
• Use ▼/▲ or 1 … 0 to select a preset channel.
– “Input Password” appears.
– If “Input Password” is not displayed, press OK to call the
text message.
• Enter the password with 1 … 0.
– All locked channels are activated until you switch the dig-
ital receiver off again.
7.9 Zapping function
This function allows you to save the channel you are cur-
rently watching and switch to and between this channel and
other channels (zapping).
• To save a channel in the zapping memory: press 1 … 0 or
▼/▲ to select the channel and save it with Z.
– The channel name appears on the screen, e.g. “TV 8”.
• Press 1 … 0 or
▼/▲ to select a different channel.
• Press Z to switch to the saved channel and back to the chan-
nel last seen.
• Press i to finish your setting.
7.10 Selecting the audio channel
For channels broadcasting in several languages you can se-
lect a different language, the audio type and digital sound
(AC 3), if provided. Digital sound is only available at the
optical SPDIF output.
• Press i.
– The channel information is displayed.
• Press i repeatedly to select the desired audio type:
p Digital multi-channel sound (AC 3)
Stereo sound
Dual sound
Mono sound
1/2 For example, 2 languages or audio channels
are transmitted; language 1 is selected.
• Press OK to save your setting.