Operation Manual

- 6 -

2 Set-up and safety

• This digital receiver set is designed to receive and display video and audio signals.

Any other use is expressly prohibited.

• When setting up the device, make sure the mains socket is easily accessible.

• If the digital receiver is subject to a sudden change in temperature, for example when

brought in from the cold to a warm room, let it stand for at least two hours before you

connect it to the mains supply.

• Do not expose the digital receiver to any moisture. The digital receiver is designed

for use in dry rooms. If you do use it outdoors, please ensure that it is protected from

moisture, such as rain or splashing water.

• Make sure that the digital receiver is ventilated adequately.

• Do not use the device close to heating units or in direct sunlight.

• Place the device on a flat, solid surface for use.

•

If placed in a cabinet, make sure there is a minimum space of approx. 10 cm

around it!

• Thunderstorms are a danger to all electrical devices. Even if the device is switched off,

it can be damaged by a stroke of lightning to the mains or the antenna cable. There-

fore always disconnect the device from the mains and from the antenna unit during a

thunderstorm.

• Never open the device under any circumstances. No liability is accepted for any dam-

age caused by incorrect handling.

Environmental note

If you do not intend to use the digital

receiver

for some time (for example at night), we

recommend that you switch it with

 to stand by. Power consumption is reduced to

approx. 0.5 Watts.