ǵ DIGITAL SATELLITE RECEIVER DSR 2530 DEUTSCH ENGLISH
CONTENTS ____________________________________________ 2 4 General information 4 4 5 Packing contents Digital satellite reception Special features of your digital receiver 6 Set-up and safety 7-9 Overview 7 8 9 The front of the digital receiver The back of the digital receiver The remote control 10-11 Connection and preparation 10 10 10 11 11 11 11 Connecting the satellite antenna Connecting the television Connecting a video recorder Connecting an AV receiver or hi-fi system Connecting a digit
27-31 Additional functions 27 27 28 28 29 30-31 Setting the menu language Deleting stations automatically Preset satellite stations Automatic station search Manual station search Timer functions 32-33 Special settings 32 32 33 Resetting the digital receiver to its original state Updating the digital receiver software Selecting the remote control level 34-36 Information 34 34 34 35 35 36 37 Displaying station reception properties Displaying device information Connecting the digital receiver to a P
GENERAL INFORMATION __________________ Packing contents 1 2 3 4 5 6 DSR 2530 Digital Satellite Receiver Tele Pilot 766 S remote control Two batteries for the remote control (2 x 1.5 V, Mignon, e.g. UM-3 or AA) Euro/AV (Scart) cable Power cord Operating manual Digital satellite reception In order to use your new DSR 2530 digital receiver you need a digital-compatible satellite antenna, which must be installed and aligned to the required satellites (for example Astra and EutelSat/Hotbird).
GENERAL INFORMATION______________________________ Special features of your digital receiver The DSR 2530 digital receiver can receive and process all unencrypted digital satellite stations. This digital receiver has a built-in digital receiver unit for satellite stations. The receiver unit converts the signals from digital satellite stations to provide outstanding audio and picture quality.
SET-UP AND SAFETY ___________________________ °C °C 2h To ensure that that this high quality, easy-to-use digital receiver gives you lasting entertainment and enjoyment, please note the following information. This digital receiver is designed to receive, record and play back video and audio signals. Any other use is expressly prohibited. ǵ ON/OFF When setting up the digital receiver, make sure it is in a horizontal position and that the mains socket is easily accessible.
OVERVIEW ____________________________________________ The front of the digital receiver ǵ ON/OFF ON/OFF Switches the digital receiver on and off. Ǽ • (red) The digital receiver is in standby mode. TV Lights up in TV mode. RADIO Lights up in radio mode. SUB Lights up if there are subtitles. REC Lights up during timer recordings. i Opens and closes the main menu. P+, P- Switch channels up and down one by one. In the menus: move the cursor up/down, select and change individual entries.
OVERVIEW _________________________________________________ The back of the digital receiver EURO AV 2 VCR RS 232 EURO AV 1 TV INPUT SAT Antenna socket for the satellite antenna. AUDIO OUT L R Left/right stereo sockets (cinch) for hi-fi system. VIDEO OUT Video signal output socket (FBAS) for television or AV receiver. DIGITAL AUDIO OUT Audio output sockets for digital audio signal (cinch, optical) for digital multi-channel amplifier.
OVERVIEW ________________________________________________ The remote control Ǽ PIP z TV-G TXT A/B MHP TV Calls up the device connections menu. ? Displays programme information. 1 ... 0 Select stations. d Switches the sound to mute and on again. i Opens the main menu. z Switches between the two most recently selected channels. Ǹ Ƿ Adjust the volume. P+ P- Switch channels up and down one by one. OK Opens the station list. TXT Switches between teletext and TV modes.
CONNECTION AND PREPARATION__ SAT EURO AV 2 VCR EURO AV 1 TV RS 232 L AV2 R DEC. - AV 2 L AV1 AUDIO L O U T I N R R EURO - AV 1 ń Connecting the satellite antenna 12 1 7 Connect the antenna cable of the satellite antenna to the »INPUT SAT« socket on the digital receiver (screw connector, F connector).
CONNECTION AND PREPARATION _________________ Connecting an AV receiver or hi-fi system 1 EURO AV 2 VCR EURO AV 1 TV Plug a standard cinch cable into the »VIDEO OUT« and »AUDIO OUT L R« sockets (left/right) on the digital receiver and the corresponding input sockets on the AV receiver or hi-fi system.
SETTINGS ______________________________________________ The menu This digital receiver has a very comprehensive, user-friendly menu system. The menu is displayed on the television screen. The digital receiver responds to many functions which you select on the remote control with informative menus and icons on the television screen. It enables you to select many different settings and contains information on using your digital receiver.
SETTINGS _________________________________________________ Assigning preset stations The digital receiver is already programmed with the stations from the Astra 19.2° East, Eutelsat/Hot Bird 13° East , Turksat 1C, Sirius 2/3, Amos and Hellas Sat 2 satellites. Deutsch English Español Suomi Français Svenska Italiano Polski ǵ Sprache The following settings allow you to select the menu language, the country where you are operating the digital receiver and the main satellites.
SETTINGS _________________________________________________ Editing the station list You can change the order of preset stations as required and delete stations you do not need. Edit Channel Lists Channel list 1 In the main menu, select »Channel lists« with »P+« or »P-« and press »OK« to confirm. 2 Select »Channel list« by pressing »OK«. – The station list appears.
SETTINGS _________________________________________________ Editing the list of favourite stations You can change the order of preset stations as required and delete stations you do not need. You can select your favourite stations and save them in up to four lists. Edit Channel Lists Channel list 1 In the main menu, select »Channel lists« with »P+« or »P-« and press »OK« to confirm. 2 Select »Favourites 1«, »Favourites 2«, »Favourites 3« or »Favourites 4« with »P+« or »P-« and press »OK« to confirm.
SETTINGS _________________________________________________ Setting the local time To ensure that the TV guide always shows the current programmes at the right time, you must enter the difference between your local time and GMT (Greenwich Mean Time at longitude “0”). All times given by the TV guide are then converted to your local time. With clock changes (e.g. daylight saving time), you need to correct the time difference.
SETTINGS _________________________________________________ Adjusting the digital receiver to the television set Specifying the video signal at the Euro AV (TV) output Installation Menu language Channel search You can choose between the settings »CVBS« (normal picture quality), »RGB« (high picture quality) »Y/C« (S-Video signal) and »YUV« (component signal). The default setting is »RGB«.
SETTINGS _________________________________________________ Selecting the television picture conversion If you have a 4:3 format television or flat screen, the following settings are available: »Pan&Scan« for wide-screen playback without black bars on the top and bottom edges of the screen. »Letterbox« for wide-screen playback with black bars on the top and bottom edges of the screen. 1 In the main menu, select »Installation« with »P-« or »P+« and press »OK« to confirm.
SETTINGS _________________________________________________ Adjusting the digital receiver to the LNB configuration of the satellite antenna The digital receiver has been factory set so that it is ready for operation, without time-consuming adjustment, with most satellite antennas and LNB configurations. Changes in this menu have a direct effect on the reception characteristics of the digital receiver and should therefore only be made by an expert.
SETTINGS _________________________________________________ Audio settings Audio settings Audio channel English Audio output Stereo Volume adjustment ❙ Digital output PCM Format Select and open ■■❙ ❙ 1 In the main menu, select »Settings« with »P-« or »P+« and press »OK« to confirm. 2 Select »Audio« by pressing »OK«. – The »Audio settings« menu appears. ■ ■ ■ ■ ■ ■ Back Note: Further operation is explained in the following sections.
SETTINGS _________________________________________________ Volume adjustment You can set the standard volume here. This is the volume of the device after switching on. Audio channel English Audio output Stereo Volume adjustment Digital output Modify Back and confirm ■■❙ ❙ ❙ ■ ■■ ■ ■ ■ ■ ■ PCM Format 1 Select »Volume adjustment« by pressing »P-« or »P+« and press »OK« to confirm. 2 Press » « or » « to set the level and press »OK« to confirm.
BASIC FUNCTIONS ______________________________ Switching on and off 1 Press »Ǽ« to switch on the digital receiver from standby mode. 2 Press »Ǽ« to switch the digital receiver to standby mode. – The mode indicator lights up red. Mode selection You can choose between TV and radio modes. 1 Press » TV « or » Radio « to select the mode. Note: You can also change modes by selecting »Program information« in the main menu.
BASIC FUNCTIONS ______________________________________ Muting the sound 1 Press » d« on the remote control to mute the sound. 2 Press » d« on the remote control to switch the sound on again. – You can hear the sound at the volume previously set. Selecting stations from lists You can select stations from various lists (e.g. TV stations, favourites). 1 Press »OK« to open the station list. – The most recently activated station list appears.
BASIC FUNCTIONS ______________________________________ TV guide The TV guide provides information on the current station such as the title and descriptions of the current and next programmes. 1 TV Guide 9:15 - 9:30 9:30 - 10:00 10:00 - 10:18 10:18 - 10:34 10:34 - 11:00 11:00 - 11:31 11:31 - 12:00 12:00 - 12:20 12:20 - 12:39 12:39 - 13:00 Monday, 11.07.
TELETEXT MODE ___________________________________ Teletext Teletext is a service offered by some broadcasters which is provided along with the video and audio signals, is converted by the digital receiver and can be displayed on the TV screen. 1 Select the television station whose teletext pages you want to see. 2 Press »TXT« to call up teletext. – After a short time, teletext page 100 appears on the television screen. 3 Select the teletext page with »1 … 0« or one of the coloured buttons.
TELETEXT MODE __________________________________________ Opening the main page 1 Press »OK« to show symbols and »F « (blue) to show the main page (page 100). Opening a sub-page directly If the selected teletext page contains additional pages, the number of the current sub-page and the total number of pages are displayed. 2 3 26 Ǹ Press »Ƿ « to scroll to the next page. Press » « to scroll back a page.
ADDITIONAL FUNCTIONS _________________ Setting the menu language Menu language 1 Press »i« to open the main menu. 2 Select »Installation« with »P-« or »P+« and press »OK« to confirm. 3 Select »Menu language« with »P-« or »P+« and press »OK« to confirm. 4 Select the »Language« setting with »OK«. 5 Select your language using »P-« or »P+« and press »OK« to confirm. 6 Press »i« and then »OK« to save the settings.
ADDITIONAL FUNCTIONS _____________________________ Preset satellite stations This digital receiver has been programmed at the factory with most digital TV and radio stations on the Astra 19.2° East, EutelSat/ Hotbird 13° East, Turksat 1C, Sirius 2/3, Amos and Hellas Sat 2 satellites. You can see which stations have been preset by pressing »OK« to call up the TV list for TV or radio. New satellite stations are always going on air and the satellite data is constantly changed.
ADDITIONAL FUNCTIONS _____________________________ Manual station search If the station search does not find a particular station, you can look for it using the manual search. Make sure you enter all the parameters of the station you are looking for correctly. You can find the latest transponder information on the teletext pages of various broadcasters, in a current satellite TV magazine or on the internet.
ADDITIONAL FUNCTIONS _____________________________ Timer functions You can set your digital receiver to switch off at a selected time or to program a recording on a connected video recorder. A total of 10 recording timers are available. Timer Sleep Timer Record timer Entering the switch-off time Select Sleep Timer Status Modify 00:00 h Off Back In the main menu, select »Timer« with »P-« or »P+« and press »OK« to confirm. 2 Select »Sleep Timer« with »P-« or »P+« and press »OK« to confirm.
ADDITIONAL FUNCTIONS _____________________________ Programming the recording timer Timer No. (1...10) 1 Start Time 13:33 h Date 11/07/2005 Duration 090 Minutes Stop Time 15:03 h Channel 2. ProSieben Status Aus Select and open Back Exit TV Channels 1 2 3 4 5 6 7 8 9 10 Sat 1 ProSieben KABEL1 NEUN LIVE Telev DSF HSE24 SAT.1 N24 TELE 5 Astra 19.2 Select and confirm Back List Exit 1 In the main menu, select »Timer« with »P-« or »P+« and press »OK« to confirm.
SPECIAL SETTINGS ______________________________ Resetting the digital receiver to its original state This function enables you to delete the station lists and all custom settings. Special functions Software Update Delete lists In the main menu, select »Installation« with »P-« or »P+« and press »OK« to confirm. 2 Select »Special functions« with »P-« or »P+« and press »OK« to confirm. 3 Select »Factory Reset« with »P-« or »P+« and press »OK« to confirm.
SPECIAL SETTINGS ______________________________ Selecting the remote control level Special functions Software Update 1 In the main menu, select »Installation« with »P-« or »P+« and press »OK« to confirm. 2 Select »Special functions« with »P-« or »P+« and press »OK« to confirm. 3 Select »Remote control« with »P-« or »P+« and press »OK« to confirm. 4 Press »P-« or »P+« to select the remote control level »Receiver 1« or »Receiver 2« and press »OK« to confirm.
INFORMATION_____________________________________ Displaying station reception properties Reception parameters 7 SAT.1 Frequency: Symbol rate: Polarisation: Bit error Rate: Reception: S/N: 13 Level: 254 Select 12480 MHz 27500 Ksym/s Vertikal 0 Ok 1 In the main menu, select »Installation« with »P-« or »P+« and press »OK« to confirm. 2 Select »Info« with »P-« or »P+« and press »OK« to confirm. 3 Select »Reception parameters« with »P-« or »P+« and press »OK« to confirm.
INFORMATION ___________________________________________ Technical data This product fulfils the European directives 89/336/EEC, 73/23/EEC and 93/68/EEC. This device conforms to the safety regulation DIN EN 60065 and therefore the international safety regulation IEC 60065. TV/radio stations: 4000 in total Number of satellites: 30 Reception range: 950 – 2150 MHz Input symbol rate: 2-45 megasymbols per second SAT IF input: 1 F connector LNB supply: 14 V/18 V, max.
INFORMATION ___________________________________________ Troubleshooting If a fault occurs, first refer to this information before you take the digital receiver for repair. If you are unable to rectify the fault using the information given here, contact your local dealer or service specialist. Under no circumstances should you attempt to repair the digital receiver yourself, as this will invalidate the guarantee.
INFORMATION_____________________________________ Additional Information for units sold in the UK. Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains supply. The range of multi-system receivers is built to work in most European countries. However, the mains plug and socket system for the UK differs from many European countries. This appliance has been supplied with a fitted, non-removable, approved converter plug for use in the UK. This converter plug is fitted with a 5A rated fuse.
Grundig Multimedia B.V. • De Boelelaan 7 • NL-1083 HJ Amsterdam • http://www.grundig.
