Operation Manual

10
Connecting the satellite antenna
1 Connect the antenna cable of the satellite antenna to the »INPUT SAT«
socket on the digital receiver (screw connector, F connector).
Connecting the television
1 Plug the Euro-AV (Scart) cable supplied into the »EURO AV1 ɮ TV«
socket on the digital receiver and the corresponding Euro-AV socket
(e.g. EURO-AV, SCART) on the television.
Connecting a video recorder
1 Plug a standard Euro-AV (Scart) cable into the »EURO AV2 ɮ VCR«
socket on the digital receiver and the Euro-AV socket (e.g. EURO-AV,
LINE IN/OUT, EXT.1) on the video recorder.
Note:
When playing back a video recording, the video and audio signal from
the video recorder is automatically looped through to the television via
the »EURO AV1 ɮ TV« socket on the digital receiver.
It may not be switched off by the power switch.
CONNECTION AND PREPARATION__
7
12
EURO AV 1 TV
EURO AV 2 VCR
R
EURO AV 1 TV
EURO AV 2 VCR
R
EURO AV 1 TV
EURO AV 2 VCR
RS 232
R
L
AV 1
AV 2
ń
R
L
AUDIO
R
L
I
N
O
U
T
DEC. - AV 2
EURO - AV 1
SAT