Owner's Manual HD Video Cameras GCT-K2326T EN 2 Megapixel Full HD-TVI Bullet Camera IR 42 LED WDR GCT-K2326T.167.1.26.06.
Content: 1. Important Safety Instructions 1 2. Package Contents 2 3. Installation 2 4. Part Names 3 5. Control Stick 3 6. OSD Menu 3 1. LENS 4 2. EXPOSURE 4 3. WHITE BAL (White Balance) 5 4. BACKLIGHT 6 5. DNR (Digital Noise Reduction) 7 6. DAY/NIGHT 7 7. IMAGE 9 11 8. MOTION 9. SYSTEM 11 10. EXIT 12 1. Important Safety Instructions Be sure to use only the standard adapter that is specified in the specification sheet.
If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (GRUNDIG is not liable for problems caused by unauthorised modifications or attempted repair.) To prevent fire or electric shock, do not expose the inside of this device to rain or moisture. 2. Package Contents These parts are included: 3.
4. Part Names 5. Control Stick - Pressing the SET UP stick: Accesses the menu mode or confirms the setting. - UP / DOWN: Chooses the desired menu. - LEFT / RIGHT: Sets up the value of the selected menu and changes the settings. 6. OSD Menu 1. Press the SET UP stick to access the menu mode. 2. Select the desired feature by using UP/DOWN. 3. If there is a setting for this feature on the right side of the screen, use LEFT/RIGHT to switch between the settings and confirm your choice by pressing the stick.
When you press the SET UP stick for the first time, the MENU page will be displayed on the monitor. LENS: You can choose between Indoor or Outdoor mode. EXPOSURE: This function is used to control the light exposure. WHITE BAL: You can control the white balance under different lighting conditions here. BACKLIGHT: You can control the backlight compensation here. DNR: This noise reduction function is to decrease the noise which can be generated under low light conditions.
BRIGHTNESS [0~20] : Sets the value of auto exposure operations. As the value increases, the screen gets brighter. SHUTTER [AUTO, MANUAL, FLICKER] : Adjust the electronic shutter speed by selecting one of modes. If you select MANUAL, the following sub-menu will appear. - SPEED [for 25 fps: 1/25~1/30,000 / for 30 fps: 1/30~1/30,000]: Control the image brightness by adjusting the shutter speed. SENS-UP [x2~x32] : This feature ensures clear images at night or under low light conditions.
- MANUAL: Select this option to fine-tune the White Balance manually. Set the White Balance first by using the ATW or the AWC mode. After that switch to MANUAL mode and press the SET UP stick. Fine-tune the White Balance (KELVIN) and change the BLUE and RED values to meet the best result. NOTE: The White Balance may not work properly under the following conditions. If that is the case, select the ATW or AWB mode (automatic mode). 1.
BLC (Back Light Compensation): This function is used to counterbalance the screen image by increasing the brightness so that a subject which appears dark due to a strong backlight can be displayed in more detail. If you select BLC, a submenu appears where you can make finer adjustments. - H-POS/ V-POS/ H-SIZE/ V-SIZE: Define the position and size of the area of interest by changing the position & size.
> SMART IR [0~20] : This option controls the IR LED (bright portion base), saturation is not expected. > EXTERN S / W [HIGH, LOW]: Set the setting of the external Switch to HIGH or LOW. > DELAY [LOW, MIDDLE, HIGH]: Set the working time of the D/N filter. - AUTO: This mode switches to ‘Colour’ in a normal environment, but switches to ‘B/W’ mode when the ambient illumination is low. To set up the switching time for AUTO mode, press the SET UP stick. In B/W mode, you can turn the BURST signal ON or OFF.
> SMART IR [0~20]: This option controls the IR LED (bright portion base), saturation is not expected. 6.7. IMAGE Here you can optimise the image quality by adjusting different options. SHARPNESS [0 ~ 20] : Adjusts the image sharpness. If the level goes up excessively, it may affect the video image and generate a noise. GAMMA [0.45 ~ 0.65] : Changes the gamma curve of the camera. COLOR GAIN [0 ~ 20] : Control the saturation of colour of the video image.
- MODE [AUTO, MANUAL] : Please choose a mode for the DEFOG function. - LEVEL [LOW, MIDDLE, HIGH] : Please choose a level for the DEFOG function. SHADING [ON, OFF] : Compensates the shading effects of lenses when the lens is set to a very wide angle. This function will reduce the brightness difference between the centre and the edges. If you select ON, a submenu appears where you can make finer adjustments. - WEIGHT [0%~100%] : You can set different levels here.
6.8. MOTION This function is used to detect moving objects in the monitored area. > SENSITIVITY [0~20]: Set the sensitivity of the motion detection. > WINDOW TONE [0~6]: Here you can set up the tone of the mask area. > WINDOW USE [0~3]: Here you can set up the zone of the mask area. > WINDOW ZONE [ON, OFF]: Here you can set the usage of the mask area to ON or OFF. > DET H-POS [0~60]: Moves the Detect area horizontally. > DET V-POS [0~34]: Moves the Detect area vertically.
IMAGE RANGE [FULL, COMP, USER] : This is a control function for the video signal for monitors. Here you can adjust the rate of the YC signal to 100%(FULL), 75%(COMP) or 100%~75%(USER). Through adjusting this function, you can find the most suitable signal value for your monitor type. When selecting "USER", you can make finer adjustments in a sub-menu that will appear.
Specifications GCT-K2326T Image Sensor 1/2.8" CMOS Progressive Scan Sony Exmor™ Pixels - Effective 1920(H) x 1080(V) Col/B&W Auto (ICR) / Color / B/W / External Sensitivity Colour 0.9 lux@50IRE (AGC max, Sensup OFF) Sensitivity B&W 0 Lux LED IR on Video Outputs 1 CH HD-TVI (BNC), 1 ch Composite 1.0Vp-p 75Ω (BNC) High Speed Shutter 1/25 ~ 1/30.000 sec, auto, Flicker S/N Ratio >50dB (AGC off) Lens Focal Length 2.8 ~ 12 mm Viewing Angle 120.9°(H) ~ 37.1°(H) / 61.4°(V) ~ 20.
Dimensions 14 English
EC Declaration of Conformity GCT-K2326T 2 Megapixel Full HD-TVI Bullet Camera IR 42 LED WDR It is hereby certified that the products meet the standards in the following relevant provisions: EC EMC Directive 2004/108/EC Applied harmonised standards and technical specifications: EN 55022: 2010 / AC: 2011 EN 61000-3-2: 2014 EN 61000-3-3: 2013 EN 50130-4: 2011 ASP AG Lüttringhauser Str. 9 42897 Remscheid Germany Remscheid, 26.06.