DVD-PLAYER operating manual GDP 9550

ENGLISH
13
Connecting a multi-channel amplifier or digital
two channel audio system
The digital multi-channel sound of a DVD can best be decoded and
played back with a multi-channel audio/video amplifier (Dolby*
digital decoder or DTS**).
1 Plug a standard cinch cable into the »DIGITAL AUDIO
OUT« socket on the DVD player and into the appropriate
socket on the digital multi-channel amplifier;
or
remove the protective cap of the optical digital output and plug
an optical digital cable into the digital output »DIGITAL
AUDIO OUT« of the DVD player and into the corresponding
socket of the digital multi-channel amplifier.
Notes:
Keep the protective cap in a safe place and put it back in place
on the device if it is not to be used for a longer period of time.
Even if you are using a digital connection, you should still make
an analogue audio connection as it is possible, depending on
the disc type, that no signal can be output via the »DIGITAL
AUDIO OUT« socket (For the connection, see page 14).
* Manufactured under licence from Dolby Laboratories Licensing Corporation.
“Dolby”, “Dolby Pro Logic”, “Dolby Digital” and the double-D symbol “
ij ” are
trademarks of the Dolby Laboratories Licensing Corporation. Copyright 1992
Dolby Laboratories, Inc. All rights reserved.
** DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc. All rights
reserved.
CONNECTION AND PREPARATION
_
S VIDEO OUT
DIGITAL AUDIO OUT
VIDEO OUT
L
R
AUDIO OUT
EURO AV TV
S VIDEO OUT
DIGITAL AUDIO OUT
VIDEO OUT
L
R
AUDIO OUT
EURO AV TV
S VIDEO OUT
DIGITAL AUDIO OUT
VIDEO OUT
L
R
AUDIO OUT
100-240 V~
50/60 Hz 10 W
EURO AV TV
OPTICAL
DIGITAL
INPUT
DIGITAL
AUDIO
INPUT
Optional