LCD TV WITH DVD PLAYER GLCD1906HDV GLCD1906HDVW GLCD2206HDV GLCD2206HDVW The Gold Technical Support Line: 1902 215 259 Personal Product Support (Charges will apply at $2.
Introduction Thank you for buying this Grundig product, which is designed to give you many years of trouble-free service. You may already be familiar with using a similar unit, but please take time to read these instructions. They are designed to familiarise you with the unit’s many features and to ensure you get the very best from your purchase. Safety is important Your safety and the safety of others is important. Therefore, please ensure you read the “Safety Instructions” before you operate this unit.
Contents Introduction …………………………………..….………1 Safety Instructions ……………………………………...3 Unpacking ………………………………………..…..…5 Wall Mount Bracket Installation Guidelines ……..……6 View of TV/Monitor ………..………………………….…7 Remote Control …………………..………………….…… 9 Installation and Connection …………….…………..…….12 TV/Monitor Screen Operation …….……………………13 TV Channel Menu and Adjustment …….……….….….15 DVD Player Operation ….……………..…………………23 Other Operation ….……………………………………..34 Notes …………….……………………………………….37 Maintenance …….
Safety instructions 1. Do not use this apparatus near water. 2. Clean only with a dry cloth. 3. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 5. Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles, and the point where they exit from the apparatus. 6.
Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Allow enough space between the TV and the wall to permit ventilation. Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure. Do not cover the ventilation openings when using the TV.
Unpacking ___________________________________________ Please make sure that the following items are included with your LCD TV/Monitor. If any item is missing, please contact the warranty line.
Wall Mount Bracket Installation Guidelines ____________________________________________ 1. Place the “LCD TV” on a solid surface. Use soft material to place over the front screen to avoid any damage. 2. Remove the 5 screws(①②③④⑤)from the unit and take away the stand (Refer picture 1). (picture 1) 3. Using the plastic cover that came with the LCD screw in the 5 screws to fix the plastic cover on the bottom of the unit (Refer picture 2). (picture 2) 4.
I.
1. Remote sensor 12. To load disc for playback. To receive remote signal from remote control. 2. 13. 4. 5. 6. To switch on/off the unit, in power 14. HDMI input jack on mode the indicator will turn to 15. VGA input jack To connect with PC. indicator will turn to red. 16. YPbPr input jack PLAY/PAUSE button 17. S-Video input jack To play/pause playback of disc. 18. Video input jack STOP button 19. Audio input (Left) jack To stop playback of disc. 20.
II.
(1) Remote control keys function 21. REPEAT: To repeat play in DVD mode 1. STANDBY: To switch on/off the unit. and display yellow subject in Teletext 2. Numeric buttons: To select a channel by mode. number input or input numbers in menus. 3. CH.LIST: To show the channel list and used 22. A-B: To repeat A-B playback or display blue subject in Teletext mode. to input the track number for discs that have 23. D.DISP: To display track information in more than 9 tracks. DVD mode. 4.
(2) Remote control battery installation and cautions Replace battery by following the below steps: Requires two AAA batteries. 1. Open the battery cover as shown below: 2. Install the battery into the battery tray. 3. Close the battery cover Caution: 1. Keep batteries out of children’s reach. 2. Don’t attempt to recharge, short-circuit, disassemble, heat or throw the batteries into the fire. 3. Always replace both batteries at the same time.
III. Installation and Connection Connect the LCD TV/monitor GLCD220 6HDV ,, 22 Widescreen LCD TV With DVD Player DC 12V 5A Adaptor Use only the adaptor type NU60-2120500-I1 Other adaptor may damage the unit N14119 MADE IN PRC Grun dig Warr an ty: 1800 509 394 Australia Grun dig Warr an ty: 0800 450 259 New Zealan d C LA SS 1 LASER PRODUCT LUO KAN 1 LA SERLAITE KLA SS 1 LASERAPPARAT 2008/0 3 1. Connect the TV RF source to the RF IN port.
2. Connect the audio sources (Including DVD, VCDR, etc.) to the proper AUDIO input jacks ‘L’ and ‘R’. 3. Connect the video source to the VIDEO input jack by RCA cable. 4. Connect the video source to the S-VIDEO input jack of the TV by the S-video cable 5. Insert the AC power to the DC adaptor, then connect 12V input jack from the monitor to its DC output jack. 6. When using the LCD as a computer screen, connect the PC from the VGA jack of the monitor by the relevant cable. IV.
2. Channel ‘1’ will appear on the left top corner of the screen after the channel scanning is finished. Press the CH- or CH+ button to select the previous or next channels or press the 0-9 buttons to enter a channel number directly. 3. Press the button on the remote control to switch between the present channel to the last channel was viewed. 4. Press the P.MODE button repeatedly to cycle through the available video picture modes from the below different types Standard 5.
(4) View the TELETEXT program 1. Press the SOURCE button to select the DTV mode. Then press the CHor CH+ button on the remote control to select a DTV channel in order to pick up the TELETEXT signal, if broadcast. 2. Press the TEXT button to enter TELETEXT mode, press the TEXT button again to exit. 3. Press the CH- or CH+ button to select the previous page or press the 0-9 numeric buttons for the next page. Note: The first number should not be ‘0’ or ‘9’. 4.
Auto tuning DTV Manual tuning - Press ◄► to select the channel, then press ENTER to start scan. ATV manual tuning - Press the ▲or▼ button to select the items, and press the ►or◄ button to adjust. See details in the following sub-options.
- Press the ENTER button to confirm and press the LCD MENU button to return to previous menu or press the EXIT button to exit. Storage To - Press the ►or ◄ button to select the channel number you want to save to. System - Press the ► or ◄ button to select the TV sound system. Current CH - Press the ► or ◄ button to select the current channel. Search - Press the ► or ◄ button to search backward/forward, - press the LCD MENU or EXIT to stop the program searching.
Picture Mode Press the ◄ or ► button to select picture modes. Contrast Press the ◄ or ► button to adjust the contrast. Brightness Press the ◄ or ► button to adjust the brightness. Colour Press the ◄ or ► button to adjust the colour. Sharpness Press the ◄ or ► button to adjust the sharpness. Tint Press the ◄ or ► button to adjust the sharpness, this option only works in VGA mode and VGA input connected. Colour Temperature Press the ◄ or► button to select colour temperature: Cool, User, Warm, Medium.
- Press the LCD MENU button to display the OSD menu,then press the ◄ or ► button to select SOUND menu. - Press the ▲ or ▼ button to select the items in SOUND menu, press the ◄ or ► button to enter the sub-menu, press the LCD MENU button to return to the previous menu or press the EXIT button to exit. Sound Mode Press the ◄ or ► to select sound mode: User, Standard, Music, Movie, Sports. Treble Press the ◄ or ► button to adjust the treble. Bass Press the ◄ or ► button to adjust the bass.
► button to enter the sub-menu, press the LCD MENU button to return to the previous menu or press the EXIT button to exit. Clock Press the ◄ or ► button to select hour and minute, press the ▲ or ▼ button to set the current time. Off time Press the ◄ or ► button to select on, press the ► button to enter the setup sub-menu, then to set the time you want the unit to be turned off, select the time using the ▲,▼,◄ or ► buttons.
- Press the LCD MENU button to display the OSD menu,then press the ◄ or ► button to select DEFAULT menu. - Press the ▲ or ▼ button to select the items in DEFAULT menu, press the ◄ or ► button to enter the sub-menu, press the LCD MENU button to return to the previous menu or press the EXIT button to exit. Language Press the ◄ or ► button to select the OSD language, the default language is English. Audio Language Press the ◄ or ► button to select the Audio language, the default language is English.
- Press the LCD MENU button to display the OSD menu,then press the ◄ or ► button to select LOCK menu. - Press the ▼button and enter password, the default password is “0000”. - Press the ▲ or ▼ button to select the items in LOCK menu, press the ◄ or ► button to enter the sub-menu, press the LCD MENU button to return to the previous menu or press the EXIT button to exit. Lock system Press the ◄ or ► button to turn off or on. Set Password Press the ENTER or ► button and enter the new password.
To see what is going to be broadcast after the current programme, press the ► button to change the time and press the◄ button to move the time back. To view a different channel, press the ▲ or ▼ button. To book a wanted programme for later watching, press the blue button to enter setting menu. Press the green button to enter the schedule list. To exit the EPG menu and watch the selected channel, press the EPG or EXIT button. VI. DVD PLAYER OPERATION a. Basic operation 1.
Press the STOP button once, the DVD video player will stop. Then press the PLAY button to resume playback of the disc from the same point. Press the STOP button twice, and disc will stop completely. Press the PLAY button to start the DVD playback from the first track. FAST FORWARD/ BACKWARD Press the or buttons to toggle between different playback speeds in sequence at x2, x4, x8 or x20. Press the button to return playing at normal speed. Note: The sound is not available while playing in this mode.
Note: For different discs, the REPEAT button may have a different function. REPEAT A to B SPECIFIC SECTION You can repeat a specific section by the A-B button on the remote control. Firstly press the A-B button at the beginning of the section you want, then press it again at the end of the section. The unit will now repeat playing from A to B. If you want to cancel the repeat section, please press the A-B button once again. Note: Some discs will not respond to the A-B repeat function. e.
i. Playing in a Favourite Order Combine your favourite titles, chapters or tracks and play them in your favourite order. HOW TO SET TITLES, CHAPTERS, OR TRACKS IN A FAVOURITE ORDER The program playback function will automatically playback titles, chapters or tracks in the order preprogrammed. 1.
j. Selecting the Camera Angles Setting This DVD video player allows you to select from several different angles. Press the ANGLE button while playing back a scene recorded with multiple angles. You may only press the ANGLE button when the angle icon appears on the DVD display. Each time you press the ANGLE button, the angle will change. Notes: z The angle function will not work on DVD video discs that do not contain recorded multiple angles.
Note: For MP3/CD discs playback, press the LANG button to switch between different audio channels in sequence. m. MP3/JPEG playback 1. In DVD mode, Insert a MP3 or JPEG CD into the disc slot, the DVD video player will initialize the disc and the directory (folder) will be shown on screen. The first MP3 or JPEG file will be played automatically. 2.
n. INTRO playback Press the INTRO button to play the first 10 seconds of each track when playing CD discs . o. Customizing the Function Settings This DVD video player allows you to customise the performance to your personal preference. DISPLAYING THE SETUP MENU SCREEN: The DVD SETUP MENU screen asks you to select a setting category from SYSTEM SETUP, LANGUAGE SETUP, AUDIO SETUP and DIGITAL SETUP. The selected category will provide you with the setting details on the TV screen.
TV TYPE This menu enables you to select one of the three aspect ratios: 4:3 PS / 4:3LB / 16:9 z 4:3PS(Normal) Normal Pan and Scan is used for most normal television broadcasts. It has an aspect ratio of 4:3. Choose this setting when viewing the movies, the picture will fill the screen but left and right edges of the picture may be cut off from the screen. z 4:3LB(Normal) Choose this setting will allow you to to view the movies in its original aspect ratio.
PASSWORD This is used to lock and unlock the RATING setting. The default setting is locked. Enter the default password”0000” by numeric buttons, then press ENTER button to unlock. To change the password just input 4 digits you want in unlock mode. RATING You could set the rating options according to your preference. The rating restriction divided in eight different category from KID SAFE to ADULT. The default setting is ADULT. Note: please refer to PASSWORD to lock/unlock the rating setting.
2. Language Setup Press the▲,▼,◄ or ► buttons to select the LANGUAGE setup icon, press ENTER button to confirm. You could choose the available languages as displayed on the screen menu. Note: Audio languages, Subtitle languages and Menu languages are DVD discs specified. 3. Audio Setup AIDIO OUTPUT Press the▲,▼,◄ or ► buttons to select the AUDIO OUT setup icon, press ENTER button to confirm. SPDIF/OFF: No output is sent to the coaxial output.
TONE Press the▲,▼,◄ or ► buttons to adjust the Tone setting. 4. Digital Setup DYNAMIC RANGE Press the▲,▼,◄ or ► buttons to adjust the compression ratio for different audio effect, When selected FULL, the peak signal value is smallest; When selected OFF, the peak signal value is biggest. DUAL MONO Press the▲,▼,◄ or ► buttons to select 4 different audio output modes: STEREO / MONO L / MONO R / MIX MONO.
VII. Other Operation Earphone operation This unit possesses an earphone jack. Connect your earphones to the socket and adjust the volume. Once plugged in, the speaker output will be cut off automatically. PC audio in operation This unit has a PC audio input jack. Connect the unit to your PC with the correct audio cable (not included). Ensure the unit is in PC mode and adjust the volume.
Trouble Shooting Should the unit not function, please check the following table to find out the possible problem. If you still can not solve the problem, please contact the Grundig Warranty line. a. DVD player SYMPTOM No sound CAUSE POSSIBLE CURE Wrong connection or loose Check and correct all connection; connections; System mute. Cancel mute. Disc dirty or scratched Clean or change the disc.
b. TV/Monitor Symptom Remedy 1. Check whether the power plug is connected to the power No power supply. 2. Pull out the plug and wait for 60 seconds, and then insert the power plug again and switch on the TV/monitor. No picture 1. Check whether the antenna is connected properly. 2. Change to another channel. 3. Change the length and the contrast setting. 4. Make sure that the AV picture input cable is connected properly. No sound 1. Increase the volume. 2.
VIII. Notes (1) Please read these operating instructions carefully before you operate this unit. (2) When you want to cut off the electricity supply to the unit, please press the STANDBY button on the unit, then take out the plug from the wall outlet. (3) Don’t press any buttons if you are not using the unit. Set the STANDBY button to “OFF”, and take out the batteries from the remote control if the unit is not being used for a long period of time. (4) Be cautious of the safe mark.
IX. Maintenance 1). Cleaning the cabinet Use a soft cloth slightly moist with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. 2). Cleaning discs When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre outwards. Do not use solvents such as benzine, thinners, commercially available cleaners or antistatic spray intended for analogue records.
X. Specifications Model No. GLCD2206HDV/GLCD2206HDVW Screen size LCD 22 inch Screen format 16:9 Resolution 1680*1050 Contrast 1000:1 Brightness 300 cd/m² Display colours 16.7M View angle 170° (horizontal) / 160° (vertical) Response time 5 ms TV system DTV: DVB-T ATV: PAL I/BG/L/DK DTV decode Audio: MPEG2 Audio Layer I&II Video: MPEG2 Transport MP@HL Demodulator : COFDM TV DTV de-mod. OFDM Mod.
Model No. LCD GLCD1906HDV/GLCD1906HDVW Screen size 19 inch Screen format 16:9 Resolution 1440*900 Contrast 700:1 Brightness 300 cd/m² Display colours 16.7M View angle 160° (horizontal) / 160° (vertical) Response time 8 ms TV system Digital: DVB-T/ Analog: PAL I/BG/L/DK DTV decode Audio: MPEG2 Audio Layer I&II Video: MPEG2 Transport MP@HL Demodulator : COFDM TV DTV de-mod. OFDM Mod.
XI. Display modes Resolution Horizontal Freq. (KHz) Vertical Freq. (Hz) 720x400 31.5 70 640x400 31.5 70 640x480(VGA) 31.5 60 640x480(VGA) 37.9 72 640x480(VGA) 37.5 75 800x600(SVGA) 37.9 60 800x600(SVGA) 47.2 72 800x600(SVGA) 46.9 75 1024x768(XGA) 48.4 60 1024x768(XGA) 56.5 70 1024x768(XGA) 60.0 75 1280x1024(SXGA) 63.5 60 1280x1024(SXGA) 80.0 75 1. Modes, which are not listed in the above table, may not be supported.
Warranty Please keep your receipt as proof of purchase. This product is warranted for any defect in materials or workmanship for three years after the original date of purchase. This product is for normal domestic and office use only. This warranty does not cover damage from misuse or neglect , accidental damage, vermin infestation, excessive voltages such us lightning or power surges or any alternation that affects the performance or reliability of the product.
PO BOX 6287 Silverwater NSW 1811 www.grundig.net.au Ver.