User manual

18 ENGLISH
Preparation
55
Your multi hair trimmer requires
one 1.5 V AA LR6 alkaline
battery.
1 To open the battery compartment,
rotate the battery cap
B
to the
left and pull it off.
2 Insert the AA alkaline battery,
so that the + and - marks on the
battery match with the polarity
marks in the battery compartment.
Notes
55
The appliance will not work if the
battery is inserted incorrectly.
55
Remove the battery if the
appliance will not be used for a
long period of time.
Environmental note:
55
Batteries, including those which
do not contain heavy metal,
should not be disposed of with
household waste. Always dispose
of used batteries in accordance
with local environmental
regulations.
3 To close the battery compartment,
put the battery cap
B
back on
and rotate it to the right until the
cap snaps into place.
OPERATION ___________________________
Attaching and exchanging
attachments
1 Ensure that the appliance is
switched off.
2 If there is an attached attachment,
remove it by turning it to the right
to the unlocked position and pull it
off.
3 Attach the desired attachment
by placing it on the top of the
appliance and turning it to the left
until it locks into position.
Removing hair from nose
1 Ensure that the appliance is
switched off.
2 Attach the trimming attachment
with rotating blade
E
.
3 To turn the appliance on, turn the
On/Off switch
B
to the right.
4 Insert the cutting unit gently into
the nostril.
Caution
55
Do not insert the appliance too far
into the nose during use.
5 Gently move the cutting edge
in and out of the nostril while
rotating the appliance.
6 To turn the appliance off, turn the
On/Off switch
B
to the left.