User manual

19ENGLISH
OPERATION ___________________________
Note:
55
The vertical trimming head
C
can
be used for nose hair removal
as well.
Removing hair from
eyebrows
1 Ensure that the appliance is
switched off.
2 Attach the vertical trimming head
C
.
Notes
55
For trimming attach the eyebrow
comb attachment
D
on the
vertical trimming head
C
.
55
Depending on the direction of
the eyebrow comb attachment,
its cutting length will be either 3
or 5 mm.
55
To remove hairs completely
use only the vertical trimming
head
C
.
4 To turn the appliance on, turn the
On/Off switch
B
to the right.
5 Gently guide the cutting unit over
the area of unwanted hair along
the eyebrow line or the eyebrow
itself.
Caution:
55
Do not apply excessive pressure
as this damages the attachment
and may cause skin injury.
6 To turn the appliance off, turn the
On/Off switch
B
to the left.
Removing hair from ear
1 Ensure that the appliance is
switched off.
2 Attach the vertical trimming head
C
.
3 To turn the appliance on, turn the
On/Off switch
B
to the right.
4 Insert the cutting unit gently into
the ear.
Caution
55
Do not insert the appliance too far
into the ear during use.
5 Gently move the cutting edge in
and out of the ear while rotating
the appliance.
6 To turn the appliance off, turn the
On/Off switch
B
to the left.
Note:
55
The rotating head
E
can be used
for ear hair removal as well.