User manual

9
ENGLISH
OPERATION ______________________________
Caution
█
Make sure to place the glass jug
H
on the
warming plate
I
quickly (max. 30 seconds).
Otherwise the brewed coffee from the filter
could overflow. If you want to use the glass
jug for more than 30 seconds switch off the
appliance.
█
Never pull out the filter basket
C
during the
brewing process even if no water is draining
from the filter. Extremely hot water or coffee
can spill out from the filter basket and cause
injury.
█
If water/coffee is not draining from the filter
basket
C
after several seconds with the glass
jug
H
properly in place
I
immediately un-
plug the unit and wait 10 minutes before open-
ing and checking the filter basket
C
.
█
When the brewing process ends and the water
level indicator
E
is empty, there will still be
hot liquid in the filter basket
C
. Wait a few
minutes for the rest of the liquid to drip into the
glass jug
H
.
10 Remove the glass jug
H
from the warming
plate
I
as soon as the brewing process has
finished and the glass jug
H
is filled. The
coffee is ready.
11 To turn the appliance of, push the On/Off
button
P
.
12 Disconnect the appliance from the wall
socket.
Notes
█
If you want to continue the brewing process,
repeat the procedure from 1 to 12. Let the ap-
pliance cool down at least 15 minutes between
each brewing process.
█
For a better aroma, use aroma button
O
which
activates a unique brewing process that en-
hances the flavor and aroma of your coffee.
To reach this rich flavor, the coffee maker ad-
vances through several continuous cycles. This
special time-release process saturates grounds
gradually to extract the best favor and aroma.
Hints and Tips
█
Use softened or filtered water to prevent lime
build-up.
█
Store unused coffee in a cool, dry place. After
opening a package of coffee reseal it tightly to
maintain its freshness.
█
Do not reuse the coffee sediment in the filter
since this will reduce the flavour.
█
Reheating coffee is not recommended as coffee
is at its peak flavour immediately after brewing.
Automatic brewing
Note
█
In order to use the auto brew function you must
first set the clock.
Setting the clock
1 Press the settings button for hours
N
to set the
current hour.
– Press and hold the button to advance the
numbers quickly.
2 Press the settings button for minutes
M
to set the
current minute.
– Press and hold the button to advance the
numbers quickly.
Setting the auto brew
function
1 Follow the steps 1 - 8 in the “Brewing Coffee”
section.
2 Press the Program button
J
to set the desired
auto brew time.
– Program button illuminates.
3 Set the time you want the appliance to begin
brewing by using the Settings button for hours
N
and the Settings button for minutes
M
.
Note
█
To check your auto brew start time, simply press
the Program button
J
. The set time will be dis-
played for a few seconds on the display
L
. It
will automatically return to current time.