DIGITAL PICTURE FRAME GPF 6885
CONTENTS------------------------------------------------------------------------------------------------ 2 4 SETUP AND SAFETY 5 GPF 6885 5 5 Special features Packing contents 6 OVERVIEW 6 7 9 The front of the digital picture frame The rear of the digital picture frame The remote control 11 CONNECTION AND PREPARATION 11 11 12 12 12 13 14 14 14 15 15 Setting up the digital picture frame Removing the protective foil Activating the remote control battery Changing the battery Connecting the mains
26 FILE BROWSER 26 26 26 28 General information Opening the file browser File browser functions File browser external storage media 29 PREFERENCES 29 30 31 31 Setting the switch-on timer Setting the switch-off timer Setting the alarm Restoring the digital picture frame to the default settings 32 OPERATING WITH A COMPUTER 32 32 System requirements MP3 data transfers 33 INFORMATION 33 33 Technical data Environmental note ENGLISH CONTENTS----------------------------------------------------------
SETUP AND SAFETY -------------------------------------------------------------This device is intended for the reproduction of video and audio signals. Any other use is expressly prohibited. The device is designed for use in dry rooms. If you do use it outdoors, make sure it is protected from moisture such as dripping or splashing water. If the device is exposed to sudden changes in temperature, for example when taken from the cold into a warm room, wait at least two hours before using it.
GPF 6885 ---------------------------------------------------------------------------------------------------Special features – High resolution Matrix TFT screen – Playback of digital pictures without a computer – Automatic slide show with a range of transfer effects and time intervals – Music playback (MP3) via the integrated loudspeakers – Background music for the automatic slide show – Calendar function with display – Timer and alarm settings The screen of your digital picture frame meets the highest quali
OVERVIEW ---------------------------------------------------------------------------------------------The front of the digital picture frame Screen 8” TFT 4:3 screen with a transparent protective foil for transport. Infrared sensor for remote control signals.
OVERVIEW ---------------------------------------------------------------------------------------------The rear of the digital picture frame ON/OFF Switches the digital picture frame on and off. A S In the menus: move the cursor up or down. In repeat mode: select files or tracks forward or reverse. Press and hold down to increase or decrease the volume. a In the menus: move the cursor to the left or right. »s« highlights in the browser files. In playback mode: rotate pictures.
OVERVIEW ---------------------------------------------------------------------------------------------- The left side of the rear panel CF Slot for a CF memory card. SD/MMC/ MS Slot for memory cards for SD, SDHC, MMC and MS formats. The right side of the rear panel DC Socket for the mains cable. USB USB port for connecting the digital picture frame to the computer with the USB cable supplied. U USB HOST 8 Headphone jack for connecting a stereo headphone set with a jack plug (ø 3.5 mm).
OVERVIEW ---------------------------------------------------------------------------------------------The remote control Switches the digital picture frame to and from standby mode. SETUP Opens the »Setup« menu. A In the menus: moves the cursor up. In playback mode: selects the next file or the next track. In zoom mode: moves the picture section up. S In the menus: moves the cursor down. In playback mode: selects the previous file or the previous track. In zoom mode: moves the picture section down.
OVERVIEW ---------------------------------------------------------------------------------------------- j 4 In the music playback mode: starts the fast forward search at various speeds. In picture playback mode: selects the next picture. In the menus: switches one menu level back. Zooms in on scenes during picture playback. 4:3 16:9 Switches the picture format between 4:3 and 16:9 (for 16:9 photos with a resolution of > 800 x 600).
CONNECTION AND PREPARATION ---Setting up the digital picture frame 1 Place the base of the digital picture frame in the centre of the stand supplied. Note: Make sure the catch on the stand latches into place in the recess on the base of the digital picture frame or position the digital picture frame vertically in the stand supplied. Note: Make sure the catch on the stand latches into place in one of the recesses on the side of the digital picture frame. Note: Be careful of any memory cards when doing this.
CONNECTION AND PREPARATION ---Activating the remote control battery 1 When using it for the first time, activate the remote control battery by pulling out the film protruding from the battery holder. Changing the battery 1 Pull out the battery holder. 2 When inserting the battery (3 V, lithium), make sure the positive terminal (+) of the battery and the (+) sign on the holder are on the same side. 3 Push the battery holder back into the remote control until it latches into place.
CONNECTION AND PREPARATION ---Connecting or inserting data media Note: Before inserting or connecting a memory card or USB memory stick, switch off the digital picture frame with »ON/OFF«. Switch the digital picture frame on again once you have connected it up. Even if you remove the memory card or USB memory stick, the digital picture frame must be switched off, otherwise files can be damaged. Inserting a memory card The digital picture frame supports memory cards in SD, SDHC, MMC, MS and CF formats.
CONNECTION AND PREPARATION ---Connecting a USB memory stick 1 Connect the USB stick into the »USB HOST« port on the digital picture frame. Connecting an MP3 player 1 Connect the USB port of the MP3 player to the »USB« socket on the digital picture frame using a standard USB cable. Connecting to a computer 1 Switch on the computer. 2 Switch off the digital picture frame with »ON/OFF«. 3 If applicable, remove the USB memory stick or MP3 player.
CONNECTION AND PREPARATION ---Disconnecting from the computer If there is no data transfer in progress, you can disconnect the digital picture frame from the computer. You must first remove the digital picture frame from the Windows desktop by following the Windows instructions for “Removing hardware”. Note: Do not disconnect the digital picture frame from the computer while a data transfer is in progress. This can damage the data irreparably. 1 Double click the icon for removing hardware.
INITIAL SETUP ---------------------------------------------------------------------------------Switching on the digital picture frame 1 Press »ON/OFF« on the digital picture frame to switch it on. Selecting the language of the screen menu You can choose between various menu languages. The default setting is »Deutsch«. ver:0.0.33 p English 3s Random Repeat all 0 0 0 00:00 Off G 1 Press »SETUP« to open the »Setup« menu. 2 Press »A« or »S« to select the »Language« (menu language) menu item.
GENERAL FUNCTIONS ---------------------------------------------------Switching on and off 1 Press »ON/OFF« on the digital picture frame to switch it on. – Display: »Loading ...«; then the main menu appears. 8 2 Press » « on the remote control to switch the digital picture frame to standby. Loading ... 8 3 Press » « on the remote control to switch on the digital picture frame from standby. 4 Press »ON/OFF« on the digital picture frame to switch it off.
GENERAL FUNCTIONS ---------------------------------------------------Selecting the operating modes 1 Press »MENU« to open the main menu. 2 Select the »Nand« option by pressing »a« or »s« and activate with »OK«. 3 Select the operating mode by pressing »a« or »s« and confirm with »OK«: – »Photo«: picture playback. – »Music«: music playback. – »File«: file browser for the internal memory.
GENERAL FUNCTIONS ---------------------------------------------------The calendar option If you select »Calendar«, the current month with the current date and time appear. At the same time, a slide show runs with inset pictures. The date and the time must be correctly set for the calendar to function. 1 Press »MENU« to open the main menu. j 2 Select the »Calendar« option by pressing »a« or »s« and activate with »OK«. – The calendar information appears. 3 Press » « to exit the calendar mode.
PICTURE PLAYBACK -------------------------------------------------------------Basic picture playback functions Starting picture playback 1 Press »MENU« to open the main menu. 2 Select the »Nand« option by pressing »a« or »s« and activate with »OK«. 3 Select the »Photo« mode by pressing »a« or »s« and confirm with »OK«. – All available picture files are displayed as inset pictures. Photo 1/1 4 Select the picture with »a« or »s« or »A« or »S« and press »OK« to open it.
PICTURE PLAYBACK -------------------------------------------------------------Enlarging pictures (zooming) This function enables you to enlarge individual pictures and move pictures sections on the screen. You can enlarge the picture in four steps (x2, x4, x8 and x16). x4 1 Press » « repeatedly to enlarge pictures. 2 Press »a« or »s« and »A« or »S« to move the picture section on the screen in the direction you want.
PICTURE PLAYBACK -------------------------------------------------------------Opening the slide show with background music You can open the slide show with background music directly from any operating mode. 1 Press » « to open the slide show directly. – Background music playback starts with the first track of the first folder. 2 Switch off background music with » «. Changing the picture format 1 Change the picture format during picture playback by pressing »4:3/16:9«.
PICTURE PLAYBACK -------------------------------------------------------------Picture playback menu functions Setting the delay for automatic picture playback You can set the time delay of one picture to the next for the slide show. ver:0.0.21 p English 3s Random Repeat all 0 0 0 00:00 Off G 1 Press »SETUP« to open the »Setup« menu. 2 Press »S« or »A« to select the »Slideshow time« menu item.
MUSIC PLAYBACK -------------------------------------------------------------------Basic music playback functions Starting music playback 1 Press »MENU« to open the main menu. 2 Select the »Nand« option by pressing »a« or »s« and activate with »OK«. ♪ Big Big World.mp3 ♪ yesterday once mor.mp 03:22 File name: Big Big Word.mp File size: 3MB File type: MP3 3 Select the »Music« mode by pressing »a« or »s« and confirm with »OK«: – The available music files are displayed. 4 Select the music file with »A« or »S«.
MUSIC PLAYBACK -------------------------------------------------------------------Fast forward and reverse search 1 To search for a particular passage in a track, press »3« or »4« during playback. – The fast forward or reverse search begins with the »x2« speed setting. ♪ Big Big World.mp3 ♪ yesterday once mor.mp 2 To increase the speed (x4, x8), press »3« or »4« repeatedly during playback. x2 4 File name: Big Big Word.
FILE BROWSER -------------------------------------------------------------------------------General information If no external data medium is connected or being used, the file browser shows the content of the internal memory. This is the data which you have prepared and sorted on the computer ready for transferring to the digital picture frame. Opening the file browser 1 Press »MENU« to open the main menu. 2 Select the »Nand« option by pressing »a« or »s« and activate with »OK«.
FILE BROWSER -------------------------------------------------------------------------------Copying files You can copy files, provided an external storage medium is being used or connected. 1 Select the file with »A« or »S«. C:/ ♪ Big Big World.mp3 candlelight.jpg flowers.jpg Modify date: 04/27/2007 File size: 3MB File type: MP3 3 Select other files by pressing »A« or »S« and press » s« to mark. fruits.jpg ♪ great.mp3 ♪ my biggest.mp3 4 Press »OSD«.
FILE BROWSER -------------------------------------------------------------------------------File browser external storage media If an external data medium is connected or being used, another option appears in the main menu for the external memory: »SD/MMC« (memory card) or »USB« (removable storage medium). Open the file browser using this option. Opening the file browser 1 Press »MENU« to open the main menu. USB 2 Press »a« or »s« to select the »SD/MMC« or »USB« option and activate with »OK«.
PREFERENCES -----------------------------------------------------------------------------------Setting the switch-on timer The switch-on timer can only be activated once the digital picture frame has been switched to standby with » « on the remote control. If the digital picture frame is switched off with »ON/OFF« on the device, then the switch-on timer will not work. 8 Language Slideshow time Transition effect Music repeat mode Brightness Contrast Saturation Auto power on ver:0.0.
PREFERENCES -----------------------------------------------------------------------------------Setting the switch-off timer The switch-off timer automatically switches the digital picture frame to standby. Then the digital picture frame can be switched on again by pressing » « on the remote control. 8 Auto power off Date/Time Alarm Default ver:0.0.33 p 00:00 Off G 2008 01 01 00:00 00:00 Ring1 Off The correct settings for the date and time must be made before the switch-off timer can work.
PREFERENCES -----------------------------------------------------------------------------------Setting the alarm If the alarm is set, it will also function in standby mode. The alarm emits an acoustic signal at the set time. Auto power off Date/Time Alarm Default ver:0.0.33 p 00:00 Off 2008 08 15 18:58 G 00:00 Ring1 Off The correct settings for the date and time must be made before the alarm can work. 1 Press »SETUP« to open the »Setup« menu. 2 Press »S« or »A« to select the »Alarm« menu item.
OPERATING WITH A COMPUTER-------------System requirements When connected to a computer, the digital picture frame appears as a removable disk drive. This corresponds to the digital picture frame’s flash memory. Your computer should meet the following requirements: – Windows 2000 / ME / XP / Vista, Mac OS 10 or higher, Linux Kernel 2.6 – Microsoft DirectX 9.0 or higher – Microsoft Media Player 9.
INFORMATION -----------------------------------------------------------------------------Technical data This device is noise-suppressed according to the applicable EU directives. This product fulfils the European directives 2006/95/EC and 2004/ 108/EC. This device conforms to the safety regulation DIN EN 60065 (VDE 0860) and therefore the international safety regulation IEC 60065. The type plate is located on the back of the digital picture frame. You may not open the digital picture frame.
Grundig Multimedia B.V. Atrium, Strawinskylaan 3105 • NL-1077 ZX Amsterdam • http://www.grundig.
