Operation Manual

11.2.4. Printing
1. Click on the 'Printer symbol' button.
2. The current screen will be printed with the printer connected to the PC.
11.2.5. Screen Capture
1. Click on the 'Camera symbol' button.
2. The current screen of the selected channel will be saved to the path specified in the PC (Default path:
C:\SaveFolder). Click on <ActiveX Setting> to display the context menu where you can change the saving path.
11.2.6. ActiveX Settings
1. Click on the ‘Rhombus’ button in the right corner at the bottom of the screen.
2. When the setup screen appears, you can change the settings of the render type, audio, capture and saving path
as well as the video streaming.
> Render : DirectDraw is recommended in order to enable the hardware acceleration.
3. If you want to change the saving path, click <…> (Save Folder) and specify a new path. The Windows Vista user
cannot change the saving path.
4. Change the streaming settings according to the PC specification and network environment. Auto mode is
recommended.
> Sync : If this option is set, the audio signal will be synchronised with the video signal. However, you may
encounter a delay due to buffering for the synchronisation.
> Live CH : Set the audio signal to use in live monitoring mode.
> I Frame Only : Only the I frames (key frames) will be transferred.
> Type :
- Auto : The DVR will optimise the quality and FPS to the network status and the specification of the connected
PC before transferring the data.
- Main : The video will be transferred in high definition (HD).
- Second : The video will be transferred in a medium definition (SD).
5. When done, click <OK> to save your settings.
101
English