Operation Manual

11.2.7. Status tab
Click on <Status> at the bottom of the screen. You can check the event occurrence for each channel of the
connected NVR.
11.2.8. Log tab
Click on <Log> at the bottom of the screen. You can check the log of the connected NVR.
11.2.9. Status tab
Click on <PTZ> at the bottom of the screen. You can control the operations of a PTZ camera. Adjust the focus,
zooming and iris of the camera. You can use the arrow buttons to control the operations of the camera.
> Pattern / Cruise : You can configure various settings of the camera including zooming and movement (applies to
some PTZ cameras only).
> PRESET : Move the camera in a predefined direction and zoom setting.
> Swing / Auto Pan : The camera will move back and forth between two preset positions.
11.3. Search
Click on <Playback> to display the remote control screen for the NVR.
102
English