Operation Manual

11.4. Setup
Click on <SETUP> to display the remote control screen for the NVR. When done, click on <OK> to apply the
changes to the remotely connected NVR.
NOTE: If the NVR is in process of system or record setting, the remote control will be disabled.
ATTENTION: If you change the settings remotely at will, the major 'Record Settings' of the NVR may be changed,
which is not recommended at all.
11.4.1. Setup Viewer At a Glance
11.4.2. Camera
Giving a camera a title :
You can name the camera title that is displayed on each channel screen. Select a channel to name and provide a
new title. Then, click on <OK> to apply it.
NOTE: You can enter up to 9 alphanumeric characters for the camera title.
105
English