Operation Manual

Covert Setting :
You can set to hide the video of a specific camera from a specific user. Set to hide the camera video so that a
specific user or user group cannot view it. To change the covert settings from user group to user, move to the
<USER> menu and make necessary changes. When done, click on <OK> to apply the changes.
Motion Sensor :
Enable or disable motion detection for each camera. Define the area and the sensitivity which are used for motion
detection.
Activation :
Turn the motion detection On or Off for each camera and activate the Onscreen notification.
Area :
Specify the use of motion detection and reaction for each channel and set also the daytime/nighttime options.
Select a channel. Set the mask area and activation and specify the daytime range. When done, click on <OK> to
apply the changes.
NOTE: For information on how to set the motion area, please refer to "Motion Area Setup" (in Chapter 6.2.4.
Motion Sensor).
107
English