Operation Manual

PTZ Setup:

If you have a camera connected via a serial connection you can adjust the settings for the PTZ camera here.

Select the camera and adjust the used address number, protocol and baudrate of the camera. Activate the RS485

button, if the camera id connected over the RS485 connection.

11.4.3. Display

OSD Setting :

Conﬁgure the settings for the time, title, boundary, icon and language that will be displayed on the screen.

Make changes to each item of the OSD menu and click on <OK> to apply the changes.

NOTE: For details about each displayed item, please refer to Chapter 6.3.1. OSD.

108

English