Operation Manual

Additional camera connection for GRI-K4416A:

Connect IP cameras to the [CAM9] ~ [CAM16] ports of the hub, and connect the [LAN (DOWNLINK)] port and the

hub’s [NVR] port with an Ethernet cable to establish the connections for the channels/cameras 9~16.

If the distance between the NVR and IP camera is more than 100m:

You may extend the transfer range by connecting a switching hub or PoE device between the Ethernet port of the

NVR and of the IP camera if the desired transfer distance is longer than 100m.

Connecting cameras directly to a general switching hub requires additional connection of the camera to a separate

power supply. A

switching hub for extending the transfer range of a single channel should be connected to one

camera only.

English