Operation Manual

5. Monitoring

5.1. Start

1. For GRI-K1104A and GRI-K2208A: Connect the adapter to the 48V PoE power input port in the rear panel of the

NVR. Connect the adaptor to the 12V power input port in the rear panel of the NVR.

For GRI-K4416A: Connect the adaptor to the power input port in the rear panel of NVR.

ATTENTION: Make the connection when the power is not applied yet.

2. Turn on the power switch on the rear panel of the NVR. First you hear a beep and the LEDs light up. Several

seconds after the second beep, the GRUNDIG logo appears on the screen.

3. When the booting process is completed, first the live screen then the login screen appears.

5.2. Login

To edit or access the menu of the NVR, you should have logged in.

1. When the system starts, the login screen appears.

2. Select a user and provide the password. The default password of the "ADMIN" account is "1234".

3. Click <OK>. If the login information is correct and valid, you will see the live screen.

ATTENTION: For security purposes, change the password right after you purchased the product.

English