Operation Manual

5.5.5. Using the Status Bar in Live Mode

Selecting a split mode :

Click a desired split mode from 1, 4, 9, 16, 6 and 8 split screen. Or press the [DISPLAY] button on the remote

control until a desired split mode is displayed.

NOTE: The 4CH NVR model GRI-K1104A only supports 1- and 4-split screen modes. The 8CH NVR model GRI-

K2208A only supports 1-, 4-, 9-, 6- and 8-split screen modes.

Auto sequence :

Click on the Sequence button in the status bar, or press the [SEQ] button on the remote control to perform the

speciﬁed sequence mode. You can conﬁgure the sequence settings under the menu item <SEQUENCE>. For

details, please refer to Chapter 6.6.3. Sequence.

Controlling the PTZ :

You can control the PTZ cameras that are connected to the channels. Use the mouse to click on the PTZ button on

the status bar, or press the [PTZ] button of the remote control to initiate the predefined sequence. In PTZ mode,

use the buttons on the screen to control the PTZ or use the [ZOOM], [FOCUS] and [PRESET] buttons of the remote

control.

English