Operation Manual

3. Select a user-defined preset and register it.

> DWELL : Sets the dwell time of 00 seconds before moving to the next preset location.

NOTE: The <SCAN> function patrols between two preset positions at the specified speed and interval for back-

and-forth monitoring.

4. Select <TOUR> and click on the <ON> button.

5. Click on the <Cogwheel> button.

6. Select a user-defined preset and register it.

> DWELL: Sets the dwell time of 00 seconds before moving to the next preset location.

NOTE: The <TOUR> function patrols between multiple presets in order (PRESET 1 > PRESET 2 > PRESET 3 >…) for

automated patrol monitoring.

English