Operation Manual

2. Connect a storage device, and click on the <EXPORT> button. To save the captured image onto the built-in HDD,

press the <RESERVE> button.

NOTE: The saved image can be found under “Archiving > Reserved data management” and can then be backed up.

3. Enter the <TAG NAME> and the <MEMO> and press the <BURN> or <ERASE & BURN> button.

> A progress bar appears and indicates the progress of the export to a storage device.

> BURN : The snapshot is stored in the connected USB storage device.

> ERASE & BURN : Deletes all files in the connected USB storage and then saves the snapshot.

ATTENTION: Note that the <ERASE & BURN> option erases all data in the USB storage device and will not be

restored again once deleted.

English