Operation Manual

1. Click on <AREA SETUP> to move to the motion area setup screen.

2. If using the remote control, press the [ENTER] button to mark the current position.

3. Use the arrow buttons to move to a desired block and then press [ENTER]. The area setup will begin. Then, use

the arrow buttons to specify the area. Alternatively, you can use the drag-and-drop method to specify or release

the area by using the mouse.

4. If you select the speciﬁed area again, it will be released.

5. On the right side of the menu you can adjust the daytime and the sensitivity level of the motion detection with

several options.

English