Operation Manual

1. From <SYSTEM SETUP> - <DISPLAY>, select <OSD>.
2. Use the [
▲▼◀▶/ENTER] buttons on the remote control or use the mouse to set each option of the OSD item.
> CAMERA TITLE : Specify the display of the camera title on the screen.
> RECORDING MODE ICON : Specify the display of the record mode icon on the screen.
> AUDIO ICON : Specify the display of the audio icon on the screen.
> STATUS BAR IN FULL SCREEN MODE : Select to show/ how to show or hide the status bar in full screen mode.
- AUTO HIDE : Place the cursor in the lower area of the screen to display the status bar. If moving the cursor up,
the status bar will disappear.
- ALWAYS ON : The status bar will be displayed at all times.
- 5 SEC ~1 MIN : If no mouse movement is detected for: from 5 seconds to 1 minute, the status bar will
disappear.
> TIMELINE IN FULL SCREEN MODE : Select to show or hide the timeline in full screen mode.
- AUTO HIDE : Place the cursor in the right corner to display the timeline. If moving the cursor to the left, the
timeline will disappear.
- ALWAYS ON : The timeline will be displayed at all times.
- ALWAYS OFF : The timeline will not be displayed.
> BORDER LINE : Specify the display of the cross border between channels in a split mode.
> BORDER COLOR : Select a color for the border.
> USER NAME : Specify the display of the currently logged-in users on the status bar.
> LANGUAGE : Select a menu display language.
3. To apply the change, click on <APPLY> in the bottom of the screen.
4. When done, press the [EXIT] button on the remote control or click on <CLOSE> in the lower screen. The
confirmation message will appear and you will return to the previous menu.
6.3.2. Monitor
If you change from monitoring mode to sequence, you will have to set the interval of the sequence first.
43
English