Operation Manual

1. From <SYSTEM SETUP> - <DISPLAY>, select <MONITOR>.

2. Use the [

▲▼◀▶/ENTER] buttons on the remote control or use the mouse to set a sequence interval for auto

mode, from 1 to 60 seconds.

3. To apply the change, click on <APPLY> in the bottom of the screen.

4. When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The

confirmation message will appear and you will

return to the previous menu.

6.3.3. Sequence

Select a split mode for the sequence, and also select a list of active items when the sequence is performed.

1. From <SYSTEM SETUP> - <DISPLAY>, select <SEQUENCE>.

2. Use the [

▲▼◀▶

/ENTER] buttons on the remote control or use the mouse to add a sequence or change the

settings of the existing sequence.

> ACTIVATION : Select a list that you want to activate the sequence for. Only one list will become active.

> ADD : Add a sequence.

English