Operation Manual

3. To apply the change, click on <APPLY> in the bottom of the screen.
4. When done, press the [EXIT] button on the remote control or click on <CLOSE> in the lower screen. The
confirmation message will appear and you will return to the previous menu.
How to add a sequence :
1. Click on <ADD> in the bottom of the screen.
2. When the "ADD" dialogue appears, enter a title using the virtual keyboard.
3. Enter the name of the sequence and click on <ADD>.
4. When the <ADD VIEW TYPE> dialogue appears, click on <ADD>.
5. When the "SEQUENCE SETUP" dialogue appears, select a split mode that you want to add from <VIEW TYPE>.
6. If the selected split mode is displayed on <CONFIGURATION VIEW>, select a channel you want to display in each
split screen.
7. If you click <OK>, the set sequence mode will be confirmed and it will be added to the Sequence list in order.
8. When done, click on <CLOSE> in the bottom of the screen. After the sequence type is saved, you will return to
the previous screen.
9. Right-click on the new sequence, or press the [ENTER] button on the remote control to edit or delete it.
45
English