Operation Manual

6.4. Audio Setup

You can configure the audio and the signal beeps.

6.4.1. Audio

You can configure here the default audio channel and configure the network audio transmission.

1. From <SYSTEM SETUP> - <AUDIO>, select <AUDIO>.

2. Use the [

▲▼◀▶

/ENTER] buttons on the remote control or use the mouse to select an item that you want to edit.

> DEFAULT LIVE AUDIO CHANNEL : Select an audio channel to monitor on the live screen.

> NETWORK AUDIO TRANSMISSION : Decide if the NVR transfers the audio signal to the remote client.

> RECEIVE NETWORK AUDIO : Decide if the NVR receives the audio signal from the remote client.

3. To apply the change, click on <APPLY> in the bottom of the screen.

4. When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The

confirmation message appears and you will return to the previous menu.

6.4.2. Buzzer Output

You can set to output the buzzer if you use the remote control.

English