Operation Manual

Detail Status :
You can check the details of the cameras that are connected to each channel. Click on the 'Cogwheel' Button in
the right area of the list to show the details. Click <RESET> in the "IP CAMERA CONFIGURATION" window to reset
the IP camera. When the IP camera settings are complete, click on <OK>.
6.7. System Setup
You can configure the settings of date/time, system management, and keyboard controller.
6.7.1. Date/Time
Specify the current date and time.
1. From <SYSTEM SETUP> - <SYSTEM>, select <DATE/TIME>.
2. Use the [
▲▼◀▶
/ENTER] buttons on the remote control or use the mouse to change the time or set the options
as necessary.
55
English