Operation Manual

1. From <SYSTEM SETUP> - <SYSTEM>, select <CONTROL DEVICE>.

2. Use the [

▲▼◀▶/ENTER] buttons on the remote control or use the mouse to set the connection options for the

control device.

> SYSTEM ID : Set the ID of the NVR so that the keyboard controller can identify it.

> PROTOCOL : Set up the protocol of the keyboard controller.

> BAUD RATE : Specify the RS485 communication speed.

> REMOTE CONTROLLER ID : Set the ID of the remote control.

3. To apply the change, click on <APPLY> in the bottom of the screen.

4. When done, press the [EXIT] button on the remote control or click on <CLOSE> in the lower screen. The

confirmation message will appear and you will return to the previous menu.

6.8. Storage

You can configure the settings and view the information of the disk and the external storage device.

6.8.1. Disk Information

It will show the information about the connected disk.

English