Operation Manual

1. Use the [▲▼◀▶

/ENTER] buttons on the remote control or use the mouse to select a <DATE> for the schedule.

2. Drag the mouse to resize the cell or use the [

▲▼◀▶] buttons to move to the cell, then press [ENTER].

3. Select a desired alarm output mode.

> ON : The alarm output is always turned on.

> OFF : The alarm output is always turned off.

> EVENT : Trigger the alarm output in synchronisation with the event.

4. Click on <COPY SCHEDULE> to check the checkbox of the date that you want to copy the schedule at.

5. When done, click <OK> to apply the settings.

6. To apply the change, click <APPLY> in the bottom of the screen.

7. When done, press the [EXIT] button on the remote control or click on <CLOSE> in the lower screen. The

confirmation message will appear and you will return to

the previous menu.

6.9.2. Event Notification

Specify the methods of notification such as the buzzer, video pop-up or email if an event occurs.

English