Operation Manual

1. From <SYSTEM SETUP> - <EVENT>, select <EVENT NOTIFICATION>.

2. Use the [

▲▼◀▶] buttons on the remote control or use the mouse to select one option from <BUZZER>,

<DISPLAY> and <EMAIL>.

3. Use the [▲▼◀▶

/ENTER] buttons on the remote control or use the mouse to set the output method and duration

4. To apply the change, click on <APPLY> in the bottom of the screen.

5. When done, press the [EXIT] button on the remote control or click on <CLOSE> in the lower screen. The

confirmation message will appear and you will return to the previous menu.

Buzzer output :

You can notify the user of the event using the buzzer.

> DURATION :

- TRANSPARENT : Keep the buzzer out for as long as the event lasts.

- UNTIL KEY : Keep the buzzer out until a mouse or remote control button is pressed.

- 5 ~ 300 SEC : Keep the buzzer out for as long as specified.

Display :

If an event occurs, you can display the video screen or a pop-up message to notify the user of the event.

English