Operation Manual

7. Record Setting

You can conﬁgure the record settings for the NVR. Only authorised users can access the Record Setup menu.

7.1. Starting the Record Setup Menu

> How to use the mouse :

> How to use the remote control :

7.2. Record Setup

7.2.1. Operation Mode

You can set the recording options for Auto or Manual mode here.

1. From <RECORD SETUP> menu, select <OPERATION MODE>.

2. Use the [

▲▼◀▶

] buttons or use the mouse to set <RECORD SETUP MODE> to <AUTO CONFIGURATION> or

<MANUAL CONFIGURATION>.

3. Set the recording options for each selected Record mode.

4. To apply the change, click on <APPLY> in the bottom of the screen.

5. When done, press the [EXIT] button on the remote control or click on <CLOSE> in the lower screen. The

conﬁrmation message will appear and you will return to the previous menu.

Auto Configuration :

If you choose this as your preferred record mode, the NVR will recommend to you the optimised settings for the

selected record mode.

English