Operation Manual

4. When done, click on <OK>. You can check the recording size in the size table under the time selection bar.

ATTENTION: The video size, FPS, quality and audio recording options may differ depending on the specification of

the IP camera. For some IP cameras, the video transfer may be interrupted if some of the options are changed.

Schedule Setting :

1. Select a start day of the week on the schedule.

2. Click on a time cell from which you want to start the schedule and drag it to a desired cell. Or use the [

▲▼

◀▶

]

buttons on the remote control to move to the cell and press [ENTER]. Then, use the [

▲▼

◀▶] buttons to move to a

desired cell and press [ENTER] again.

3. When the time selection is complete, you will be prompted to specify the use of the recording in the Record

Setup window.

4. To apply the change, click on <APPLY> in the bottom of the screen.

5. When done, press the [EXIT] button on the remote control or click on <CLOSE> in the lower screen. The

confirmation message will appear and you will return to the previous menu.

7.2.3. Motion Recording

Specify the recording size of the motion event if it occurs and create a schedule for that recording.

English