Operation Manual

1. From the <RECORD SETUP> menu, select <MOTION RECORD>.

2. Use the [

▲▼◀▶] buttons on the remote control or use the mouse to select either <SIZE/FPS/QUALITY> or

<SCHEDULE>.

3. Set each item of <RESOLUTION>, <FPS>, <QUALITY> and use of the <AUDIO> for the motion recording.

NOTE: For more information, see Chapter 7.2.2. Continuous Recording.

4. To apply the change, click on <APPLY> in the bottom of the screen.

5. When done, press the [EXIT] button on the remote control or click on <CLOSE> in the lower screen. The

confirmation message will appear and you will return to the previous menu.

7.2.4. Alarm Recording

Specify the recording size of the alarm event if it occurs and create a schedule for that recording.

English