Operation Manual

1. From the <RECORD SETUP> menu, select <ALARM RECORD>.

2. Use the [

▲▼◀▶] buttons on the remote control or use the mouse to either select <SIZE/FPS/QUALITY> or

<SCHEDULE>.

3. Set each item of <RESOLUTION>, <FPS>, <QUALITY> and use of the <AUDIO> for the alarm recording.

NOTE: For more information, see Chapter 7.2.2. Continuous Recording.

4. To apply the change, click on <APPLY> in the bottom of the screen.

5. When done, press the [EXIT] button on the remote control or click on <CLOSE> in the lower screen. The

confirmation message will appear and you will return to the previous menu.

7.2.5. Panic Recording

In panic recording mode, you can specify the recording size and quality of the video.

1. From the <RECORD SETUP> menu, select <PANIC RECORD>.

2. Set each item of <RESOLUTION>, <FPS>, <QUALITY> and use of the <AUDIO> for the panic recording.

NOTE: For more information, see Chapter 7.2.2. Continuous Recording.

English