Operation Manual

1. From the <SEARCH> menu, select <EVENT SEARCH>.
2. Use the [
▲▼◀▶] buttons or use the mouse to specify the <START> and <END> times in the left of the event
search list.
3. Select a channel to search.
4. Mark the checkbox of the event type to search for in the <EVENT> list.
5. Press the <SEARCH> button. The search results will be listed as shown in the picture below.
> TYPE : Displays the event type.
> TIME : Displays the recording start time.
> CONTENTS : Shows the details of the event found.
> ORDER BY : If you select <OLDEST>, the list will be sorted with the earliest one on top.
6. Double-click on a desired event or click on <PLAY> in the lower right corner to move to the play screen.
7. If you want to stop playing and return to the search screen, press [EXIT] or [SEARCH] on the remote control.
You can also click on <MENU> in the lower left corner and select a desired menu.
9. Playback
9.1. Using the Playback
1. To playback the searched data:
You can search for and playback a searched data.
2. To playback with the live viewer:
- Simply double-click on a desired time point in the right corner of the play screen.
NOTE: If you move the cursor to the rightmost, the "Timeline" bar will be displayed.
- Select a desired channel in the live screen and right-click on it to select <PLAY> in the context menu. Then,
select a desired play time.
88
English