Operation Manual

> Using the URL

- Check the "Network Status" and verify the <DDNS ADDRESS> and <WEB SERVICE PORT> of the NVR (Chapter

6.6.4. Network Status).

- Enter the DDNS address and web service port in the address bar of the browser. Ex.:

http://00115f123456.DVRLINK.NET:8080

NOTE: In a router network, you have to set the "Port Forwarding" and "DMZ Setting" to allow access from outside.

For the necessary settings of the router, please refer to the user manual of the router or contact the

manufacturer of the router

1. Provide the user ID and password.

NOTE: The default User name is: ADMIN. The default password (P) is: 1234.

2. Click the upper warning bar to install the ActiveX.

NOTE: If you fail to download the ActiveX control, move to Tools > Internet Options > Security > Custom Level >

Download unsigned ActiveX control, and change its setting from “Disable (recommended)” to “Enable”, and then

click OK.

3. Click on <Install> in the appearing window.

4. When the installation is complete, you will see the live screen.

English