BLUETOOTH SPEAKER BLUEBEAT GSB 110 EN
_________________________________________________________________________________ 8 + – ● A AUX IN MICRO USB 3
_ ________________________________________________________________________________ 5 SET-UP AND SAFETY 5 5 RF Exposure Warning Important battery information Warning 6 OVERVIEW 6 6 6 Bluetooth device compatibility Controls and sockets LED indicators 7 CONNECTION AND PREPARATION 7 7 7 Connecting the power adapter Charging the device Connecting external devices 8 OPERATING 8 9 9 9 9 Bluetooth function Play Audio signal from an external device Hands-free speaker Battery Saving Switch off 10 INF
SET-UP AND SAFETY_ _____________________________________________ Please note the following instructions when setting up the device: This device is designed for the playback of audio signals. Any other use is expressly prohibited. 7 Make sure there is adequate ventilation when positioning the device. There must be a free space of at least 10 cm behind the device. Do not place objects on the ventilation slots. 7 Do not cover the device with newspapers, table cloths, curtains, etc.
OVERVIEW______________________________________________________________ Bluetooth device compatibility Controls and sockets Your GSB 110 connects with all Bluetooth Devices that support the A2DP profile including the most smartphones, laptops and tablets. See the figure on page 3. 8 Press and hold, switches the device on and off. Starts and pauses playback. Switches the hands-free equipment on and off. + Enhanced the Volume. – Reduced the volume.
CONNECTION AND PREPARATION_____________________ Connecting the power adapter Note: 7 The device can also be charged on a computer using the micro USB cable supplied. 1 Connect the single plug of a standard USB Micro adapter into the »MICRO USB« socket. 2 Connect the USB Micro adapter into the wall socket. Caution: 7 The device is connected to the mains with the USB Micro adapter. Pull out the USB Micro adapter if you want to completely disconnect the device from the mains.
OPERATING_ ___________________________________________________________ Connecting a paired Bluetooth Device Bluetooth function Pairing Bluetooth Device Note: 7 Make sure that AUX IN cable is removed from the »AUX IN« socket. Otherwise, it can‘t enter into pairing mode. 1 Press and hold the »8« button for 2 seconds to turn on the unit. – The blue indicator will start blinking. – Now you can ready to pair your device with the unit. 2 Activate on the Bluetooth Device the Bluetooth function.
OPERATING_ ___________________________________________________________ Play Audio signal from an external device Alternative you can listen to the sound of a connected external device (e.g. a MP3 player) through your device. Notes: 7 It will auto-switch into AUX IN mode from Bluetooth mode after insert AUX IN cable to the device. 7 If want to back to Bluetooth mode, please remove AUX IN cable from the »AUX IN« socket.
INFORMATION_______________________________________________________ Technical data This device is noise-suppressed according to the applicable EU directives.This product fulfils the European directives 1999/5/EC and 2011/65/EU. The type plate is located on the bottom of the device. Power supply USB socket: 5V, 500 mA Micro-USB Power Output DIN 45324, 10% THD Output power: 1 x 3 W Dimensions and Weight L x W x H: 99 x 60 x 60 mm Weight: 230 g Technical and design modifications reserved.
Grundig Intermedia GmbH Beuthener Strasse 41 90471 Nürnberg www.grundig.
