BLUEBEAT DOCKING SPEAKER GSD 320 EN
_________________________________________________________________________________ M 8 + – < > eII 8 M A iPod dock AUX IN DC IN 12V – 3 +
CONTENTS_ _____________________________________________________________ 5 SET-UP AND SAFETY 6 OVERVIEW 6 6 Controls and sockets Remote control buttons 7 CONNECTION AND 7 7 7 Connecting the power adapter Activate the remote control battery Change remote control battery (Type CR 2025) Connecting the iPod/iPhone Connecting external devices 7 7 PREPARATION 8 iPoD/iPhone MODE 8 8 8 8 Made for iPod/iPhone Supported iPod/iPhone models The software is made to support the following iPod/iPhone mode
SET-UP AND SAFETY_ _____________________________________________ Please note the following instructions when setting up the device: This device is designed for the playback of audio signals. Any other use is expressly prohibited. 7 Make sure there is adequate ventilation when positioning the device. There must be a free space of at least 10 cm behind the device. Do not place objects on the ventilation slots. 7 Do not cover the device with newspapers, table cloths, curtains, etc.
OVERVIEW______________________________________________________________ Controls and sockets Remote control buttons See the figure on page 3. 8 Switches the device on from 8 M Press briefly to switch on the device, press longer to switch off the device In operating: Select the input sources. – ecreases the volume. D The symbol of the button illuminate, if the devive is switched on. + Increases the volume. symbol of the button illumiThe nate, if the devive is switched on.
CONNECTION AND PREPARATION_____________________ Connecting the power adapter Note: 7 Check that the mains voltage on the power adapter corresponds to your local mains supply. If this is not the case, contact your specialist dealer. 1 Connect the single plug of the power adapter into the »DC IN 12 V« socket. 2 Connect the power adapter into the wall socket. Caution: 7 The device is connected to the mains with the power cord.
IPOD/IPHONE MODE____________________________________________ Made for iPod/iPhone Playing the contents of an iPod/iPhone 1 Switch on the device from stand-by mode by pressing »8« on the remote control or press briefly »8 M« on the device. “Made for iPod/iPhone” means that an electronic accessory has been designed to connect specifically to an iPod/iPhone, and has been certified by the developer to meet Apple performance standards.
BLUETOOTH MODE________________________________________________ Connecting a paired Bluetooth Device Bluetooth device compatibility Your GSD 320 connects with all Bluetooth Devices that support the A2DP profile including the most smartphones, laptops and tablets. Pairing Bluetooth Device 1 Switch on the device from stand-by mode by pressing »8« on the remote control or press briefly »8 M« on the device. – The blue indicator A will start blinking. – Now you can ready to pair your device with the unit.
BLUETOOTH MODE________________________________________________ Disconnect the Bluetooth Device 1 Disconnect the Bluetooth Device via its menu. Automatic shutdown The device will automatically switches to Standby mode if no audio signal from auxiliary Bluetooth device is played for 15 minutes. For further using switch on the device again. Switch of 1 Press »8« on the remote control or press and hold the »8 M« button on the device for 2 seconds to turn off the unit.
INFORMATION_______________________________________________________ Technical data 0890 This device is noise-suppressed according to the applicable EU directives.This product fulfils the European directives 1999/5/EC, 2009/125/ EC and 2011/65/EU. The type plate is located on the bottom of the device. CE declaration of conformity The CE declaration of conformity for the device can be found as a PDF file on the Grundig homepage, www.grundig.com/download/doc.
Grundig Intermedia GmbH Beuthener Strasse 41 90471 Nürnberg www.grundig.
