ma de for you 15” LCD TV + DVD PLAYER GULCD15S/DVD INSTRUCTION MANUAL Thank you for buying a Grundig product Website : www.grundig-uk.co.
Table of Contents Important Safety Instructions 3 Conformity and Compliance 5 Precautions and Reminders Wall Mounting the Set 6 8 Specifications 9 Remote Control Functions Front Panel Buttons Rear Panel Inputs 10 11 12 Quick TV Set-Up Guide 13 Quick Connecting Guide 14 PC Connection On Screen Display (OSD) Menu 16 17 Menu Display Settings 17 Remote Control of TV and DVD Screen & Inputs 18 19 Picture Settings 19 Color Menu 20 Audio Menu 21 Input Selection 22 TV Setting 23 MTS (
Important Safety Instructions Caution Risk of electronic shock Do not open CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of a sufficient magnitude to constitute a risk of electric shock.
Important Safety Instructions 10. Protect the power cord from being walked on or pinched particularly at plugs, AC power outlets, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13.
Conformity and Compliance ELECTRICAL CONNECTION For your safety please read the following information. Warning: This appliance must be earthed by connecting to a mains power outlet with a protective earthing connection. The appliance must be connected to a 220-240 volts 50 cycle AC supply by means of a three pin socket, suitably earthed and should be protected by a 3 amp fuse in the plug or a 3 amp fuse in the consumer unit. Never use a fused mains plug without the fuse cover.
Precautions And Reminders Place unit on even surfaces. Don't place the TV in confined spaces or in a box when using it. 6 inches Unplug immediately if there is malfunction such as no picture, no video/audio, smoke, bad odor from TV. Don't Insert any object inside the TV box such as metals or flammable materials. Don't open the TV cabinet.
Precautions And Reminders Do not cover or block any vents and openings. Inadequate ventilation may shorten the life of the display unit or cause overheating. Remember to unplug the power cord from the power outlet before cleaning the display unit. Only use recommended cleaners do not allow water to remain on the screen as it could cause permanent damage.Only use a lightly dampened cloth to clean the LCD screen. Always remember to protect the screen from finger prints. Do not use chemical solvents.
Wall Mounting the Set The wall mount set (Optional) Contact a professional installer if you are unsure about wall mount installation. Improper installation may cause injury and damage the display unit. Caution: When removing unit stand, place the display panel face down on a soft fabric to avoid damaging the unit. Wall Mount Procedures Use standard VESA plate mounting for wall mount. Please mount this product solidly on the wall or pole. 1. Remove the back cover of the base stand. 2.
Specifications Model No. Panel GULCD15S/DVD Panel Size 15" Aspect Ratio 4:3 Resolution 1024 x 768(XGA) Brightness 250 nits Contrast Ratio 500:1 Viewing Angle (H/V) 120/100 Response Time(Tr+Tf) TV function 25ms RF system PAL,SECAM Broadcasting System B/G,D/K,I,L/L' Channel Coverage Video System Type VBI support Teletext 46.25MHz~862.25MHz PAL,SECAM,NTSC3.58,4.
Remote Control Functions Key(s) TV / DVD AV Number (0-9) I-II ZOOM STATUS A / CH SLEEP T.T MUTE DVD SETUP Cursor keys ( MENU (VOL+, VOL-) PBC DVD MENU (CH+, CH-) SUBTITLE TITLE ENTER MIX INDEX HOLD REVEAL SIZE RED, GREEN, YELLOW, BLUE CANCEL SUBCODE Functionality Turns the TV on and off. Press to switch remote control inputs between TV or DVD mode. Use to select an input source. Opens and closes the disc tray. Use number (0-9) buttons to create stations and preset programs.
Front Panel Buttons Front Panel 1 2 Function Keys 3 4 5 6 7 8 9 10 11 12 1 Power indicator: Stand by mode displays amber. Power on displays green. 7 Power key: Press once to turn on. Press again to return to stand by mode. 2 IR Receiver: Aim at the IR receiver window when using Remote Controls. 8 Play/Pause key: Disc play/pause and enter key. 3 Channels / Cursor Up/Down keys: Press - to select channels from high to low, and press + to select channels from low to high.
Rear Panel Inputs Rear Panel Antenna S-Video Power Audio in Y Pb Pr Video L R VGA Antenna Input Socket : 75 Ω type coaxial cable connector. Y Pb Pr Input Socket : Connect appliances with component output. AV (Video / L / R) Input Socket : Connect with DVD player or VCR AV output. S-VIDEO Input Socket : Connect appliances with S-VIDEO output. SCART Input Socket : Connect DVD pla yer or VCR AV output. VGA Input Socket : Connect with VGA socket of PC.
Quick TV Set-Up Guide 10 Adjusting the view angle Press down on the stand and gently adjust the set to a suitable viewing angle. The LCD TV monitor can be tilted 10 degrees backward. Power connection 1. Connect adaptor to power input of TV. 2. Connect adapor to power cord. 3. Connect the other end of power cord to power supply. POWER Connecting to An Aerial 75 Connect antenna or CATV cable to the antenna port of the tuner box. Turning ON/OFF the TV 1.
Quick Connecting Guide ● This product includes SCART, AV, S-VIDEO, YPbPr input sockets to connect with DVD player, VCR, DV Camera to obtain better picture quality. ● Input jacks and source selection need to match correctly for display of correct picture. ● Video and Audio jacks are color-coded: Video........................................... Yellow (Y) Audio (L)..................................... White (W) Audio (R)..................................... Red (R) Y.....................................
Quick Connecting Guide Using YPbPr Input for DVD Player / VCR POWER DVD / SVCD / VCD / CD / MP3 PLAYER ON OFF MIC1 OPEN/CLOSE VOL.1 VOL.2 + PLAY FWD STOP PAUSE TAXT SOUND + Audio in R L G B R Power REW DIGITAL OUT MIC2 G B R Y Pb Pr Video L R VGA L R Using S-VIDEO for DVD Player / VCR POWER DVD / SVCD / VCD / CD / MP3 PLAYER ON OFF MIC1 OPEN/CLOSE REW FWD TAXT DIGITAL OUT MIC2 VOL.1 VOL.
PC Connection Connecting PC Instructions 1. Video Signal Connection: Connect VGA signal cable to VGA input socket of the TV and VGA output of the computer. 2. Audio Signal Connection: Connect audio signal cable to AUDIO IN jack on the TV and LINE OUT jack of the computer sound card. PC AUDIO IN VGA PORT Power Audio in Y Pb Pr Video L R VGA Supported Resolutions Operating Instructions MODE 1. Turn on the TV with the power switch . 2. Press the AV button on the remote twice to select PC mode.
OSD Settings: Menu (for all modes) : 19KP10-H9 V . 51 TV Refer to table for brief description of each option. OSD H Position: Adjust OSD horizontal position OSD V Position: Adjust OSD vertical position Transparency: Adjust OSD background transparency OSD Timeout: Adjust OSD showtime setting Language: Adjust OSD language settings (English/French/Dutch/Italian/German/ Czech/Slovak) Version: Display system information MENU Certain properties of the On Screen Display (OSD) can be changed from this menu.
Remote Control of TV and DVD The remote control has two modes of operation, one for TV and one for DVD. Switching between the two modes is achieved by using the TV / DVD button on the remote control. The TV / DVD button works like a toggle switch. One press switches the remote to DVD mode and the second press switches the remote back to TV mode. An indicator appears in the top left hand corner of the TV screen to tell you what mode the remote is in.
OSD Settings: Screen & Inputs There are 3 sections in the OSD menu: Press MENU button to show up the OSD menu. Press MENU button again to exit. (1)Main Menu: press t u to select option icons. (2)Option Menu: Press ▲▼ to select options. Press t u to decrease or increase value. PC 640 X 480 59.9 HZ (3)Information: Display information. OSD Settings: Picture (for AV, S-VIDEO, SCART, & TV input) (for YPbPr input) (for PC input) Refer to table for brief description of each option.
OSD Settings: Color Press TV/DVD button to ensure remote is in TV mode (see "Remote Control of TV and DVD"). (for YPbPr input source) PC 640 X 480 59.9 HZ Refer to table for brief description of each option.
OSD Settings: Audio Press TV/DVD button to ensure remote is in TV mode (see "Remote Control of TV and DVD"). (for ALL modes) TV 640 X 480 59.9 HZ Refer to table for brief description of each option. Volume: Bass: Treble: Balance: Mute: Adjust sound volume Adjust lower-pitched sound performance Adjust higher-pitched sound performance Adjust to emphasie left or right speaker Tem porary cut off sound OSD Settings: Audio From the AUDIO menu you can set various options for the sound.
OSD Settings: Input Selection Press TV/DVD button to ensure remote is in TV mode (see "Remote Control of TV and DVD"). (for ALL modes) Refer to table for brief description of each option. Input PC: YPbPr: AV: S-VIDEO: TV: SCART: Function Change to PC(VGA) signal Change to YPbPr (Component) signal Change to AV (Composite) signal Change to S-VIDEO signal Change to TV signal Change to SCART signal Peripheral Equipment PC (desktop/laptop) VHS, DVD player, etc. VHS, DVD player, camcorder, etc.
OSD Settings: TV Setting How to operate the on-screen menus and set-up the television. Press TV/DVD button to ensure remote is in TV mode (see "Remote Control of TV and DVD"). (for TV mode) This menu is only available when TV input is selected (see “Input selection” on previous page). Refer to table for brief description of each option.
OSD Settings: TV Setting Press TV/DVD button to ensure remote is in TV mode (see "Remote Control of TV and DVD"). MTS, option sets the audio mode ( STEREO or MONO ) 1. Press the MENU button on the remote. 2. Select the TV menu with the LEFT / RIGHT arrow keys on the remote. 3. Select MTS with the UP / DOWN arrow keys on the remote. 4. Use the LEFT / RIGHT arrow keys on the remote to select STEREO or MONO. MANUAL SCAN, to tune channels manually 1. Press the MENU button on the remote. 2.
OSD Settings: TV Setting Press TV/DVD button to ensure remote is in TV mode (see "Remote Control of TV and DVD"). LABEL, re-name programmes 1. Press the MENU button on the remote. 2. Select the TV menu with the LEFT / RIGHT arrow keys on the remote. 3. Select SET CHANNEL with the DOWN arrow key on the remote. 4. Select the channel number you want to NAME with the remote LEFT / RIGHT buttons. 5. Select LABEL with the DOWN arrow key and press RIGHT arrow key to enter this option. 6.
DVD Operation and Settings BASIC OPERATIONS Inserting and Ejecting DVD Discs 1) Press TV/DVD button to ensure remote is in TV mode : “TV RC" appears on-screen. (See "Remote Control of TV and DVD".) 2) Select DVD picture by pressing the AV button once or by using the INPUT SELECT menu. 3) Press the TV/DVD button until "DVD RC" appears in the top left of the screen. The remote is now in DVD mode. 4) Insert the disc into the disc slot (make sure the label side faces backwards).
DVD OSD Menu DVD OSD Menu Descriptions 1) To access the DVD OSD menu, press the TV/DVD button. 2) Press the DVD SETUP button. There are six option icons available across the top of the screen. 3) Press the LEFT and RIGHT arrow keys ( left / right of the MENU button) to select the available options. 4) Press the UP and DOWN arrow keys (above / below the MENU button) to select the available options. 5) Press the ENTER button to confirm the selected option.
DVD OSD Menu (2) AUDIO SET-UP PAGE: .. Audio Setup Page .. Speaker Setup Equalizer 3D Processing Go To Audio Setup Page l Speaker Set-up Downmix has three settings: - LT/RT: Left Total/ Right Total Sound -Stereo: Stereophonic Sound -V SURR: Virtual Surround Sound NOTE: LT = Left channel sound from both speakers. RT = Right channel sound from both speakers. l Equalizer There are eight types of preset equalizers to choose from: (None, Rock, Pop.......
DVD OSD Menu (3) VIDEO SET-UP .. Video Setup Page .. Component Quality Go To Video Setup Page l Component .. Video Setup Page .. Component Quality The user can choose to apply component video (OFF), output YUV signal (YUV) or output RGB signal (RGB). OFF YUV RGB Component l Quality Select Quality to access the video quality set-up menu. This menu will allow you to choose amongst seven options and modify the quality of the video (sharpness, brightness, contrast, gamma, hue, saturation, luma delay).
DVD OSD Menu l Audio l Subtitle Options are available in 8 different languages (English, French, Spanish, Chinese, Japanese, Korean, Russian and Thai). Please note that availability depends on each DVD original setting. .. Preference Page .. TV TypeNTSC Parental Audio Subtitle Default Subtitles are available in 8 different languages (English, French, Spanish, Chinese, Japanese, Korean, Russian and Thai). Please note that availability depends on each DVD original setting. .. Preference Page ..
DVD OSD Menu (6) EXIT Exit the DVD set-up menu.
Teletext Instructions Teletext is a free information system that displays text on your TV. It is noteworthy that not all TV stations provide this service. The time is displayed on the top right corner of the screen. Using Teletext Press the “T.T.” button of the remote control. You will directly go into the list of contents, which is displayed on the TV screen. Selecting a page of Teletext 1. According to the list of contents, press the appropriate number buttons.
OSD Menu Descriptions Troubleshooting Symptoms Check Item TV will not turn on / no power: l Check power adapter and cord is connected properly. l Check power adapter and cord if they have been damaged. l Check if outlet is working. l Unplug TV for a few minutes and turn it on again. l Check batteries are not dead or installed incorrectly. l Check if there are obstructions between remote and TV sensor. l Aim remote control at IR receiver window from 2 inches away.
OSD Menu Descriptions Troubleshooting l Check brightness level. Picture too dark: l Check contrast level. l Adjust saturation or hue levels. l Check LCD monitor for possible damage. Picture is not sharp or the l The reception may be weak. picture shakes: l The quality of the broadcast may also be bad. l Adjust the antenna to face the correct direction. l Make sure outside antenna has not been disconnected.