Operation Manual

on.
Cancelling the End Time function
If you want to cancel the End Time
countdown and start the programme
immediately:
•* Set the End Time from zero
(delete all end time displays)
or hold down the On/Off button
for 3 seconds. The End Time is
cancelled when the machine is
turned off and on again.
•* Then, select the programme you
want to run again.
•* Start the programme with the
Start/Pause button.
Starting the programme
•* Start the programme with the
Start/Pause button.
•* Programme follow-up light
showing the startup of the
programme will turn on.
C
Machine returns to OFF mode
when no programme is started or
no button is pressed in 10 minutes
during the programme selection.
Display and all indicators are
turned off.
When you press On/Off button,
information about the selected
programme is displayed.
Door lock
There is a locking system on the
loading door of the machine that
prevents opening of the door in cases
when the water level is unsuitable.
"Door Locked" LED in the panel turns
on when the loading door is locked.
Changes after programme
has started
Adding laundry after the programme has
started:
Stopping the machine (pause)
Press the Start/Pause button to switch
the machine to pause mode while a
programme is running. The Start/
Pause and the light for the step which
the machine is in start flashing in
the programme follow-up indicator
to show that the machine has been
switched to the pause mode. Also,
the loading door light flashes until it
is possible to open the door. Loading
Door light shall be turned off once the
loading door is ready to be opened, but
the programme step light and Start/
Pause light continue to flash.
Also, when the loading door is ready to
be opened, Loading Door light will also
turn off in addition to the programme
step light.
Changing the auxiliary function, speed
and temperature
Depending on the step the programme
has reached, you can cancel or activate
the auxiliary functions; see, "Auxiliary
function selection".
You may also change the speed and
temperature settings; see, "Spin
speed selection" and "Temperature
selection".
C
If no change is allowed, the
relevant light will flash for 3 times.
Adding or taking out laundry
•* Press the Start / Pause button
to pause the machine. The
programme follow-up light of the
relevant step during which the
machine was switched into the
pause mode will flash.
•* Wait until the Loading Door can
be opened.
•* Open the Loading Door and add
or take out the laundry.
•* Close the Loading Door.
•* Make changes in auxiliary
functions, temperature and speed
settings if necessary.
•* Press Start/Pause button to start
the machine.
Child Lock
With the Child Lock function, you can
prevent children from tampering with
the machine. Thus you can avoid any
changes in a running programme.
C
You can switch on and off the
machine with On / Off button
when the Child Lock is active.
When you switch on the machine
again, programme will resume
from where it has stopped.
To activate the Child Lock:
* Hold down the button for the 1st
Auxilliary Function for 3 seconds.
"Child Lock Enabled" appears on the
display after the countdown as "3_2_1"
28