Operation Manual

55 / EN
Washing Machine / User‘s Manual
Troubleshooting
Foam is overflowing from the detergent drawer.
Too much detergent is used. >>> Mix 1 tablespoonful softener and ½ l water and pour into the main wash
compartment of the detergent drawer.
Put detergent into the machine suitable for the programmes and maximum loads indicated in the
“Programme and consumption table”. When you use additional chemicals (stain removers, bleachs and
etc), reduce the amount of detergent.
Laundry remains wet at the end of the programme. (*)
Excessive foam might have occurred and automatic foam absorption system might have been activated
due to too much detergent usage. >>> Use recommended amount of detergent.
* Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent
any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-
spun.
** Regular drum cleaning might not be applied.>>>
Clean the drum regularly. See, 7.2
A
WARNING: If you cannot eliminate the problem although you follow the instructions in this
section, consult the dealer or the Authorised Service Agent. Never try to repair a nonfunctional
product yourself.