ǵ HAIR CLIPPER TITAN MC 4540 ENGLISH
_________________________________________________________ A B C C D E F 2 ENGLISH
SAFETY _______________________________________________ Please note the following information when using the appliance: 7 7 7 7 7 The appliance is designed for domestic use only. To prevent damage and danger from improper use, please observe the operating instructions and keep them in a safe place. Never use the appliance in the bath, shower or over a washbasin filled with water when it is connected to the mains plug; nor should it be operated with wet hands in this case.
OVERVIEW__________________________________________ Fold out page 2 so that you have the illustrations in front of you. Controls Accessories A Ceramic blade of the cutting head. 1 Mains adapter. 2 Charging unit. B Steel blade of the cutting head. 3 Storage case. C Switch for switching on and off. 4 D Charge indicator. Eight comb attachment for different trim lengths and for making hair thinner. E Socket for plugging in the mains adapter plug or connecting to the charging unit. 5 Oil.
POWER SUPPLY ___________________________________ Operation with rechargeable batteries When using the built-in rechargeable nickel metal hydride batteries, use the mains adapter supplied as a charger. 1 Plug the mains adapter into the E socket, and plug the mains adapter into the mains socket. – The display D lights up on »Charge«. – Once loading is complete, the display changes to »Full«.
POWER SUPPLY ___________________________________ Mains operation (with mains adapter) Environmental note 7 This appliance contains nickel metal hydride batteries. Do not dispose of it with your household waste at the end of its service life. Open the housing. Take the used batteries out and make sure to dispose of them in an environmentally sound manner, for example using public recycling sites. Find out about the legal regulations which apply in your area.
OPERATION ________________________________________ Special features The appliance has a ceramic/stainless steel ( A and B ) cutting head. Trimming hair 2 2 1 Put on a comb for the cutting grade you need (see the table below). 1 2 To do this, latch the holders 1 of the comb attachment into the pins on the right and left side of the appliance 2 . First, push the left holder over the left pin, then the right holder over the right pin.
OPERATION ________________________________________ Comb attachment grades Useful tips 7 Comb #1 Comb #2 Comb #3 Comb #4 Comb #5 Comb #6 Comb #7 Comb #8* 2 mm 3 mm 6 mm 9 mm 12 mm 16 mm 20 mm 7 7 7 * is designed for thinning out hair. Note 7 The stated trim lengths describe the remaining hair length. All the lengths here are approximate. Note 7 Without the mains adapter, the charged appliance can be used for wet hair in the bathroom.
CLEANING AND CARE ___________________________ Cleaning and care 1 Switch off the appliance and unplug it if you are running it from the mains. 2 Take off the comb. 3 Clean the housing, the cutting head and the comb attachment with a soft damp cloth or the supplied brush. Note 7 The cutting head and the appliance can be cleaned under running water. However, you must never completely immerse the appliance in water. 5 Do not use cleaning agents. 6 Put the comb back on again.
CLEANING AND CARE ___________________________ Storage Environmental note If you do not want to use the appliance for a long period of time, please store it carefully. This product has been made from high-quality parts and materials which can be re-used and recycled. 1 Ensure that it is unplugged and completely dry. Therefore, do not throw the product away with normal household waste at the end of its life. Take it to a collection point for recycling electrical and electronic devices.
INFORMATION ____________________________________ Guarantee Technical data The guarantee does not cover the cutting head or defects which do not significantly impair the value or function of the appliance. The guarantee is invalidated if the appliance is damaged, opened or improperly used. This product fulfils the European directives 89/336/EEC and 73/23/EEC. Power supply Batteries: Nickel metal hydride Mains adapter Ni-MH Technical and design modifications reserved.
INFORMATIONEN ________________________________ Service und Ersatzteile Unsere Geräte werden nach den neuesten technischen Erkenntnissen entwickelt, produziert und geprüft. Sollte trotzdem eine Störung auftreten, so bitten wir Sie, sich mit Ihrem Fachhändler bzw. mit der Verkaufsstelle in Verbindung zu setzen. Sollte dies nicht möglich sein, wenden Sie sich bitte an das GRUNDIG-Service-Center unter folgenden Kontaktdaten: Telefon: 0180/5231852* (Montag bis Freitag von 08.00 bis 18.
INFORMATIONEN ________________________________ GRUNDIG Kundenberatungszentrum Montag bis Freitag von 8.00 bis 19.00 Uhr Deutschland: Österreich: 01 80 / 523 18 80 * 08 20 / 220 33 22 ** * gebührenpflichtig (0,12 €/Min. aus dem Festnetz) ** gebührenpflichtig (0,145 €/Min. aus dem Festnetz) Haben Sie Fragen? Unser Kundenberatungszentrum steht Ihnen werktags stets von 8.00 – 19.00 Uhr zur Verfügung.
Grundig Multimedia B.V. Atrium, Strawinskylaan 3105 • NL-1077 ZX Amsterdam • http://www.grundig.
