MICRO HİFİ SYSTEM MS 240 EN
CONTENTS----------------------------------------------------------------------------------------------------------------------------------3 SET-UP AND SAFETY 4 4 6 7 8 OVERVIEW The hi-fi system controls The back of the device The remote control The hi-fi system displays 9 9 9 9 CONNECTION AND PREPARATION Connecting the loudspeakers Connecting external devices Connecting an MP3 player or a USB memory stick Inserting a memory card Removing the memory card Connecting the headphones Connecting to the main
SET-UP AND SAFETY-----------------------------------------------------------------------------------------------Please note the following instructions when setting up the system: Thunderstorms are a danger to all electrical devices. Even if the hi-fi system is switched off, it can be damaged by a lightning strike to the mains. Always disconnect the mains plug during a storm. 7 The hi-fi system is designed for the playback of audio signals. Any other use is expressly prohibited.
OVERVIEW---------------------------------------------------------------------------------------------------------------------------------The hi-fi system controls 8 U MS 235 SOURCE SOURCE + PRESET – PRESET SD CARD UBS UBS VOLUME + VOLUME – USB USB SD CARD DISPLAY OPEN • e 7 The front of the device 8 SOURCE + PRESET - SD CARD U witches the hi-fi system to and S from standby mode. Switches on the system.
OVERVIEW---------------------------------------------------------------------------------------------------------------------------------MS 235 E UBS VOLUME SD CARD USB PUSH OPEN PROG 3 7 / On the top 4 7/ PROG I n tuner mode: stores radio stations. In CD/USB/SD mode: programmes tracks and reviews the playlist. 3 4 I n tuner mode: tunes radio stations; press briefly to change the frequency backwards or forwards in steps.
OVERVIEW---------------------------------------------------------------------------------------------------------------------------------The back of the device FM Antenna AUX In LEFT +/– RIGHT +/– Ü FM Antenna Wire antenna for FM reception. AUX In udio signal input for connecting A an external source (ø 3.5 mm). LEFT+/– T erminals for connecting the loudspeaker cable, left channel. RIGHT+/– T erminals for connecting the loudspeaker cable, right channel. Ü Mains cable.
OVERVIEW---------------------------------------------------------------------------------------------------------------------------------The remote control CD SLEEP USB SD CARD TUNER AUX CASS DISPLAY Switches the loudspeakers of the hi-fi system to mute and back on again. 8 Switches the hi-fi system to standby mode and from standby mode to the last input source selected. CD Selects the sound source for CD mode. USB elects the sound source for the S USB mode.
OVERVIEW---------------------------------------------------------------------------------------------------------------------------------The hi-fi system displays The CD source is selected. Timer is activated. The USB source is selected. In tape mode: recording. The CARD source is selected. T he ultra bass system is activated. The TUNER source is selected. The AUX source is selected. The CASS source is selected. RAND I n CD/USB/SD mode: all tracks are played in random order.
CONNECTION AND PREPARATION---------------------------------------Connecting the loudspeakers Connecting an MP3 player or a USB memory stick The hi-fi system supports most MP3 players and USB memory sticks. Caution: 7 The hi-fi system must be switched off while the USB connection is being made. If it is not switched off, data can be lost. MS 235 1 Insert the wires of the loudspeaker cable into the terminals »RIGHT+/–« and »LEFT+/–«. – Connect the cables marked in red to the red terminals.
CONNECTION AND PREPARATION---------------------------------------Inserting a memory card Connecting the headphones The hi-fi system supports SD/SDHC and MMC memory cards. Caution: 7 The hi-fi system must be switched off while the memory card is being inserted. If it is not switched off, data can be lost. MS 235 SOURCE UBS PRESET VOLUME SD CARD USB MS 235 SOURCE UBS PRESET VOLUME 1 Insert the headphone plug (ø 3.5 mm) into the » U « socket on the front side of the hi-fi system.
CONNECTION AND PREPARATION---------------------------------------Connecting to the mains supply Notes: 7 Check that the mains voltage on the type plate (on the back of the hi-fi system) corresponds to your local mains supply. If this is not the case, contact your specialist dealer. 7 Putting batteries in the remote control 2 Before connecting the AC power cord to the wall socket, ensure that all other connections have been made.
SETTINGS---------------------------------------------------------------------------------------------------------------------------------------Setting the clock Tuning and storing radio stations The first time you connect the hi-fi system to the mains, it switches to standby. You can store up to 30 stations in the FM frequency range on presets. 1 In standby mode, press and hold »PROG« on the remote control for 2 seconds. – Display: »12 H« or »24 H«.
GENERAL FUNCTIONS---------------------------------------------------------------------------------------Switching on and off Selecting sound settings The only way to disconnect the hi-fi system from the mains supply is to pull out the plug from the wall socket. You can choose between the preset sound settings FLAT, CLASSIC, ROCK, POP and JAZZ. 1 Switch on the hi-fi system from standby mode by pressing »8« or »SOURCE« on the hi-fi system. – The system switches to the last selected source.
TUNER MODE ---------------------------------------------------------------------------------------------------------------------Selecting the tuner input source Viewing RDS information 1 Select the TUNER input source with »SOURCE« on the hi-fi system or »TUNER« on the remote control. – The most recently selected station is played (Last Station Memory). – Display: » « and station name or the frequency. If an RDS station is being received, information can be opened up in the display.
CD MODE---------------------------------------------------------------------------------------------------------------------------------------The hi-fi system is suitable for music CDs bearing the logo shown here (CD-DA), and for CD-Rs (CD-Recordables) and CD-RWs (CD-Rewritables) with audio data or MP3 and WMA formats. Not suitable are CD-ROM, CD-I, CDV, VCD, DVD or computer CDs. In MP3/WMA mode, the terms “album” and “file” are very important.
CD MODE---------------------------------------------------------------------------------------------------------------------------------------Pausing and resuming playback 1 Press » « during playback to pause. – In the display, the elapsed playing time flashes. 2 Continue playback by pressing » «. Repeat actual track 1 During playback, press »3« on the hi-fi system or press »5« or »6« on the remote control. – Playback starts from the beginning.
CD MODE---------------------------------------------------------------------------------------------------------------------------------------MP3/WMA displays Programming track numbers You are provided with information of the artist, album and title if such information is stored on the CD, USB or SD (ID3 tag and ticker text). Programme in the stop position to select and store your disc tracks in the desired sequence. If youlike, store any track more than once. Up to 32 tracks can be stored in the memory.
USB AND SD/SDHC/MMC MODE----------------------------------------------For MP3/WMA mode with MP3 player, USB memory stick or SD/SDHC/MMC memory card, the same playback and search functions are available as for CD mode (see CD Mode section). Playing the contents of an MP3 player or a USB memory stick Notes: 7 The USB socket of this device is a standard socket.
USB AND SD/SDHC/MMC MODE----------------------------------------------5 Press » « to start playback with the first file of the first album. – Display: elapsed playing time and information of the file appear in the display. Note: 7 To select an album, press »+« or »–« on the hi-fi system or » « or » « on the remote control, to select a file press »3« or »4« on the hi-fi system or »5« or »6« on the remote control. Start playback by pressing » «. 6 Stop playback with »7/ «.
CASSETTE MODE -----------------------------------------------------------------------------------------------------------Synchro recording Recording from the radio 1 Press »SOURCE« on the hi-fi system repeatedly or press »CD«, »USB« or »SD CARD« on the remote control. 1 Select the TUNER input source with »SOURCE« on the hi-fi system or »TUNER« on the remote control. – Display: » « and the frequency. 4 Insert a suitable cassette in the compartment and close the compartment.
TIMER MODE--------------------------------------------------------------------------------------------------------------------------Your hi-fi system has two timer modes: – The timer, which switches the hi-fi system on at the set time, wakes you with the input source you selected and then switches off. – The sleep timer, which switches the hi-fi system off at a preset time. Notes 7 The settings for the Timer mode can only operated with the buttons on the remote control.
INFORMATION-----------------------------------------------------------------------------------------------------------------Cleaning the device Pull out the power cord from the wall socket. Clean the device by using a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Cleaning the CD unit clean the laser optics.
INFORMATION-----------------------------------------------------------------------------------------------------------------Environmental note This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Therefore, do not dispose the product with normal domestic waste at the end of its service life. Take it to a collection point for the recycling of electrical and electronic equipment.
INFORMATION-----------------------------------------------------------------------------------------------------------------Troubleshooting Not every kind of sound interference is caused by a defect in your hi-fi system. Cables that have accidentally been disconnected, damaged CDs and flat batteries for the remote control will impair functioning. Problem “NO DISC” is displayed. Radio reception is poor. Recording or playback cannot be made. The system does not react when buttons are pressed.
Grundig Intermedia GmbH Beuthener Strasse 41 90471 Nürnberg www.grundig.
