MAN SHAVER MS 6040
------------------------------------------------------------------------------------------------------------------------------------------------------------------ C B D E H F G A I J 2 L K
SAFETY -----------------------------------------------------------------------------------------------------------------------------------Please note the following instructions when using the appliance: 7 This appliance is designed for domestic use only. 7 This appliance is designed solely for trimming human facial hair. Any other use is expressly prohibited. 7 When the appliance is being charged, on no account should it come into contact with water or any other liquid.
OVERVIEW ---------------------------------------------------------------------------------------------------------------------Dear customer, Controls See the illustrations on page 2. Congratulations on the purchase of your MS 6040 men’s shaver. Protective cap. Read the following user notes care- A fully to ensure you can enjoy your B Triple cutting system (foil– quality product from Grundig for trimmer – foil). many years to come. C Extendable trimmer. D Side lock buttons for removing the foil frame.
POWER SUPPLY ---------------------------------------------------------------------------------------------------Rechargeable battery operation When operating the appliance with the built-in nickel metal hydride battery, only use the power unit supplied for charging. The power unit has an automatic 100 - 240 V~, 50/60 Hz transformer which works anywhere in the world. This allows it to adjust to all international AC voltages. 1 Press the button the appliance.
USE -------------------------------------------------------------------------------------------------------------------------------------------------Shaving Trimming 1 Remove the plastic protective cap A . Use the extended trimmer for longer hair on your face and neck, but also on the beard, moustache or sideburns. Caution 7 The foils and blade blocks may not be damaged. Replace any damaged parts before shaving. 2 Press the button the appliance.
CLEANING AND CARE ---------------------------------------------------------------------------General information The device must be cleaned regularly so that you can continue to enjoy its top performance and optimum results. Clean the housing with a soft cloth and a mild detergent. Do not use any cleaning agents. Cleaning with water 1 Press the H button to switch off the device. Caution 7 The appliance must be disconnected from the power unit.
CLEANING AND CARE ---------------------------------------------------------------------------Cleaning with the brush 1 Use the button the appliance. H to switch off 2 To remove the foil frame, press on one of the side catches D with your thumb to lift up this side of the foil frame. Then press the second catch on the other side and lift up the foil frame. 3 Remove the blade blocks E for cleaning by pulling them upwards off the oscillator F .
CLEANING AND CARE ---------------------------------------------------------------------------Replacing the blade blocks 1 Remove the blade blocks E by pulling them upwards off the oscillator F . Storage 2 Place the new blade blocks on the oscillator. 1 The appliance must be switched off and completely dry. Caution 7 Ensure that the blade blocks are firmly in position on the holder. 2 Store the appliance in the original storage case in a cool, dry place.
INFORMATION -----------------------------------------------------------------------------------------------------Environmental note Technical data This product is manufactured from high-quality parts and materiais which can be reused and recycled.Therefore, do not dispose of the device and the built-in rechargeable battery along with normal household waste at the end of its service life.
