Operation Manual

ENGLISH
16
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
Tuning and storing radio stations
After the initial automatic station search, you can
also adjust radio stations whenever you want.
Programming radio stations –
automatically for all available
radio stations
Automatic programming starts from the preset
number (1) and former programmed radio sta-
tions will be overridden.
1 Switch on the hi-fi system from standby mode
by pressing »8«.
2 Press »MODE« and rotate Jog-Shuttle to find
»FM TUNER« on display and confirm by press-
ing on the Jog-Shuttle.
3 Press and hold down » PROG.« on the remote
control to start the programming automatically.
– Display: »ATS«, available stations start to be
programmed in order of waveband recep-
tion strength.
– Display: »P01« when the first station is stored.
Notes:
7
When the automatic station search is fin-
ished, the last preset number disappears.
Station stored at preset position 1 starts to
play.
7
To stop the automatic programming. Press
»7«.
Programming radio stations –
automatic tune, for the next radio
station
Automatic tune starts from the current radio sta-
tion and stops at the next found station.
1 Switch on the hi-fi system from standby mode
by pressing »8«.
2 Press »MODE« and rotate Jog-Shuttle to find
»FM TUNER« on display and confirm by press-
ing on the Jog-Shuttle.
3 Press »MENU«, rotate the Jog-Shuttle to find
»AUTO TUNE« on display and confirm by press-
ing on the Jog-Shuttle.
4 Rotate the Jog-Shuttle clockwise to start the
auto tune from the current frequency to higher
frequency;
or
rotate the Jog-Shuttle counter-clockwise to start
the auto tune from the current frequency to
lower frequency;
– The frequency display changes rapid run-
through. The search stops if a station with
sufficient reception is found.
Note:
7
When the end of the frequency band is
reached, it will recommence searching from
the opposite end of the frequency band.
5 To store the radio station press »PROG.«.
– Display: »PROG« and preset number flashes.
6 Press number buttons »1« or »9« to store sta-
tions in preset position »P01« or »P09«.
Note:
7
To store presets »P10« to »P40«, first press
»+10« (for the tens digit) and then »1« to
»9«, ( for the units digit). If you do not press
any button for the units digit, it will be auto-
matically set to »0«.
7 To search and store more stations, repeat step
4 to 6.
Notes:
7
If stations are already stored in the preset
positions, they are overwritten when new
stations are stored.