Operation Manual

ENGLISH
20
TUNER MODE
----------------------------------------------------------------------------------------------------------------------
Selecting the tuner input source
1 Switch on the hi-fi system from standby mode
by pressing »8« on the remote control or on
the hi-fi system.
2 Press »MODE« and rotate Jog-Shuttle to
find »FM TUNER« on display and confirm by
pressing on the Jog-Shuttle.
– The most recently selected station is played
(Last Station Memory).
– Display: the frequency.
Selecting presets
1 Press »1« to »9« on the remote control to select
the presets.
2 Press »+10« on the remote control and then
»1« to »9« to select the presets from 10 to 40.
Stereo/mono reception
If the hi-fi system is receiving a stereo broadcast,
» « appears in the display. If the signal from
the stereo channel is weak, you can improve the
sound quality by switching to mono reception.
1 Press »MENU« and then rotate Jog-Shuttle to
select »FM MODE«.
– Display: »FM MODE«.
2 Press Jog-Shuttle and rotate it to switch
between mono and stereo reception.
3 Press Jog-Shuttle to confirm.
– Display: »STEREO« or »MONO«.
Note:
7
It is possible to store the Mono/Stereo func-
tion with the channel together to the preset.
RDS information
RDS (Radio Data System) is an information
system which is transmitted additionally by most
FM stations.
When the hi-fi system receives an RDS station,
the station name appears in the display, for
example »FANTASY« and » «.
Notes:
7
It may take some time before all the RDS
information is available.
7
GRUNDIG has no influence on the
correctness of this information.
Viewing RDS information
If an RDS station is being received, information
can be opened up in the display.
1 Press »DISPLAY« repeatedly to cycle through
the information.
BAY 3
(example)
Displays the name of the radio station
being listened to.
POP M
(example)
Displays the type of station being
listened to, e.g. Pop, Classic, News, etc.
Text Displays the message about the station
being listened to as ticker text (if
available).
97.90
(example)
Displays the waveband and the
frequency of station being listened to.
RDS time synchronisation
Some RDS stations transmit a time signal. If re-
ception is good, the time information will update
the time if you have selected the »CT ON« option
during the time setting. Refer to the section “Set-
ting the clock “.
Time synchronisation can take several minutes,
and even with good reception the accuracy
depends on the time signal being transmitted.
The automatic time setting is always activated
when the device is switched from standby to
tuner mode and after power failure when unit
receives a RDS station which is supporting RDS
time signal. When the device is waiting for an
RDS time signal, » « flashes on the display.
Once RDS time synchronisation completes,
» « keeps lighting.
Station types (PTY)
1 Press »DISPLAY« to display station type
code.
– If no station type code is transmitted,
»NO PTY« appears on the display.