Head-End Digital Modulator KLASSE HDM 2370 P CI A CLASS CLASS English Assembly Instructions Grundig SAT SystEms GSS Grundig SAT Systems GmbH Beuthener Straße 43 D-90471 Nuremberg Phone: Fax: E-mail: Internet: +49 (0) 911 / 703 8877 +49 (0) 911 / 703 9210 info@gss.tv http://www.gss.
Contents 1 Safety regulations .....................................................................................................4 2 General information .................................................................................................4 2.1 Packing contents .......................................................................................4 2.2 Meaning of the symbols used .....................................................................5 2.3 Technical data ..........................
5.4.2 5.4.3 5.4.1.1 Adjusting the output levels of the channel strips ...................28 5.4.1.2 Settings for TV stations .....................................................29 Automatic picture format conversion ..................................29 Adjusting the picture format ..............................................30 Locking the regional window ............................................30 Switching teletext mode off/on .........................................
1 Safety regulations Warning • Assembly, installation and servicing should be carried out by authorised electricians. • Switch off the operating voltage of the system before beginning with assembly or service work or pull out the mains plug. • Do not perform installation and service work during thunderstorms.
2.2 Meaning of the symbols used Important note —> General note • Performing works 2.3 Technical data The devices meet the following EU directives: 2006/95/EC, 2004/108/EC The product fulfils the guidelines and standards for CE labelling. HF input Frequency range: Level range: Input norm: Symbol rate: FEC: 950 … 2150 MHz 60 dBµV … 80 dBµV QPSK 2 … 40 Msymb./s, SCPC/MCPC automatic HF output Channels: Frequency range: Standard: C2 … C69 (incl. S2 … S41) 48.25 MHz … 855.25 MHz CCIR PAL B/G PAL I (GB 6.
Connections SAT inputs A and B: HF output (modulators): Connection strip (10-pin): Socket RS 232: Conditional access: 2 F sockets 1 IEC socket for supply voltages and control circuits serial interface for software update 2 channels can be decoded 2.4 Description The twin transmodulator cassette is a QPSK-converter, which converts all stations modulated according to DVB-S1 standard and QPSK2 into two PAL-modulated cable signals. The cassette has two digital SAT IF inputs and an HF output.
2.5 Software query Control unit If necessary, you can activate the indication of the software version of the control unit manually: • Press any two keys on the control unit of the head-end station simultaneously until the display goes dark and the software version, e.g. “V 37” appears. 3 Assembly 3.1 Installing the cassette Caution – Ensure the head-end station is mounted so it will not be able to vibrate.
3.2 Installing the F terminals To comply with the current EMC regulations, it is necessary to connect the lines leading in and out of the head-end station using F terminals. When mounting the cassette in an STR 19-8 head-end station which is installed in a 19" cabinet, make sure the connections leading in and out for the 19" cabinet are made using F terminals. • Insert the required number of F terminals in the openings provided in the head-end station or in the 19" cabinet.
Notes: 3 Slot for CA module 4 Eject button for CA module 5 Socket “RS 232” The operating software of the cassette can be updated via the 9-Pin D-DUB socket “RS 232” using a PC or notebook and the software “BE-Flash”. You can find the current operating software on the website “www.gss.tv”. 3.4 Retrofitting a CA module The cassette is equipped with a common interface. It allows you to connect a CA module for various encryption systems and service providers.
4 The control panel at a glance 4.1 Menu items Program the cassette using the buttons on the control unit of the head-end station. The two-line display of the control unit then shows the menus.
5 Programming 5.1 Preparation • Connect the test receiver to the HF output or the test output of the head-end station. • Set the output channel / output frequency of the cassette (see page 20) and adjust the TV test receiver to this channel. • Switch on the modulator if necessary. • Balance the output levels of the channel strips “A” and “B” if the difference in level is ≥ 1 dB (see chapter “Modulator settings”, page 19).
5.3 Programming procedure Ein / On BE–Remote V 37 please wait … t > 10 s Bx 1A TWIN-SAT C5-12,S3-24 C07 + Box 4 Bx 1A TWIN-SAT Böx 4 TWIN-SAT Bx 5A DVBT-DVBT C5-12,S3-24 C07 C5-12,S3-24 C07 BD3 C09 QPSK-PAL C2-69,S2-41 ––– Page 14 A/B Bx 4A QPSK-PAL Das Erste Bx 4A Bx 4A Bx 4A S21 on VERSION: DVB-PAL OUTPUT: Modulator: CCIR Bx 4A S21 on / off B V.16 Bx 4B QPSK-PAL Page 16 SAT.1 S09 ! Page 15 Bx 4A OUTPUT: HF-Level: 0 0 … –7 dB NORM: 5.5 FM OUTPUT: CCIR 5.
Bx 4A WSS-OUT: Signaling: on Bx 4A SERVICE: PIDs: dynamic Bx 4A OUTPUT: Teletext: on Bx 4A SUBTITLE: TXT-Page: 150 on / off dynamic / fixed on / off off / 150 ◀/▶ 100 … n Bx 4A SUBTITLE: TXT-Norm: Bx 4A West AUDIO-OUT: Dual normal Bx 4A Page 16 ◀/▶ Bx 4A LNB-FREQ: f= 10600 MHz - 13 - normal / swap AUDIO-OUT: MPEG => Audiomode " West / East MPEG / VPS
Module Hauptmenü ◀/▶ Bx 4A INPUT: Bx 4A SR= 27500 –> Information Smartkarte Jugendschutz Einstellungen Zurück MENU 1/6 Information Bitte wählen Sie mit OK AlphaCrypt Light 1.01 (c) Mascom GmbH TV-Bild ◀ TV picture ◀/▶ Bx 4A FREQ-IN: f= 11836 MHz Bx 4A 0 0.0e - 8 BER. C/N: 12.
5.3.1 Decoding 2 stations with one CA module (channel strip “B”) Page 12 ! Bx 4B on / off OUTPUT: Modulator: Bx 4B CCIR Bx 4B on OUTPUT: HF-Level: NORM: 5.5 CCIR 5.5 FM / GB 6.0 FM FM Bx 4B OUTPUT: S09 ▶ Bx 4B ▶ S09 OUTPUT: Fine Bx 4B Bx 4B LNB-FREQ: Bx 4B INPUT: SR= 22000 Bx 4B Bx 4B FREQ IN: f = 12544 MHz -0.
5.3.
5.4 Programming the cassette button for longer than 2 seconds cancels the pro—> Pressing the gramming procedure. This takes you back to the program item “Selecting the cassette” from any menu. Any entries that have not been saved are reset to the previous settings. —> Entries in the menus can be saved by pressing the M key. You are taken back to the “Selecting the cassette” menu item. • Switch on the head-end station —> The display shows the software version (e.g.
5.4.1 Programming the main menu of the cassette Querying the software version A/B Bx 4A Das Erste QPSK-PAL Bx 4A S21 DVB-PAL VERSION: B V.16 Bx 4B QPSK-PAL SAT.1 S09 ! —> The display shows e.g. the menu “Bx 4A QPSK-PAL”: “Bx” stands for cassette (box), “4” for slot 4 “A” for channel strip “A” ”QPSK-PAL” Type of cassette ”S21” Channel set • Press the button. —> The display shows e.g. the menu Bx 4A VERSION: DVB-PAL B V.16 ”B” ”V.
• By pressing , select channel strip “A” / “B” or “a” / “b”. —> The capital letters “A” and “B” indicate the channel strips of the main menu, the small letters ”a“ and ”b“ the channel strips of the time-controlled switching on and off of channels. Setting time-controlled, alternative channels • By pressing , call up channel strip “B”. • Press again: —> Call up timer “a”/“b” for time-controlled switching on and off of channels C (page 38).
• Press the button. —> The “Setting the TV standard of the output signal” – “NORM” menu is activated. Setting the TV standard of the output signal In this menu you can set the TV standard of the output signal. Bx 4A CCIR NORM: 5.5 FM CCIR 5.5 FM / GB 6.0 FM • Press to set the TV standard of the output signal. • Press the button. —> The “Setting the output channel / output frequency” – “OUTPUT:” menu is activated.
Setting the fine-tuning Only change the fine-tuning in exceptional circumstances, since once you change it, all connected television sets of the cable system must be adjusted to match it by means of corresponding fine-tuning corrections. • Press the ▶ button. —> “FINE 0” appears in the display. • Set the fine-tuning using the buttons. ◀ • Press to return to the main menu. Settings for TV stations • Press the button —> The “Automatic picture format conversion” – “VIDEO-OUT:” menu is activated (chapter 5.4.1.
• Press the button. —> The “Setting the input symbol rate” – “INPUT: ”and e.g. “SR=27500” menu is activated. Setting the input symbol rate The symbol rates of the satellite transponders can be found in the current channel table of the satellite operator, in various satellite magazines and in the Internet. Module Hauptmenü ◀/▶ Bx 4A INPUT: SR= 27500 Bx 4A MENU 1/6 Information –> Information Smartkarte Jugendschutz Einstellungen Zurück Bitte wählen Sie mit OK AlphaCrypt Light 1.
of the antenna system and head-end station as well as the preceding settings of the cassette. p ◀/▶ Bx 4A FREQ-IN: f= 11836 MHz 0 Bx 4A 0.0e - 8 BER. C/N: 12.0 dB Anzeige: Signalqualität A Display: Signal quality VIDEO # • Use ◀ / ▶ to position the cursor under the digit of the frequency displayed to be set. • Press to set the input frequency. • After setting the input frequency set the frequency offset shown in the display to less than 1 MHz using the buttons. • Press the button.
Channel selection As soon as the automatic station search has found all of the TV or radio channels, the corresponding data appears in the display of the head-end station. # Bx 4A 01/10+ Das Erste TV Bx 4A PROVIDER: ARD Meaning of the terms displayed in this example: “Bx 4A” Cassette 4, channel strip “A”. “01/09” The 1st of 9 channels is displayed “+” means that the sound of the TV programme currently being shown is being broadcast in several languages.
• To select the TV and radio stations of this broadcaster, use the buttons. • By pressing , you can call up various station information about the current TV or radio station in the “PROVIDER:” menu. To return to the main menu press the button again. • By pressing the VIDEO button, you switch between the “Setting the input frequency” and the “Channel selection” menu. Bx 4A FREQ-IN: f= 11836 MHz 0 VIDEO Bx 4A 01/10+ TV Das Erste • Press the button.
Setting the volume level In this menu, you can balance unequal volume levels of TV and radio stations in the various channel strips. Bx 4A AUDIO-OUT: Volume: 0 dB –24 … +6 • Set the volume level to the same level as the levels of the other output channels using the buttons (+6 dB … -24 dB), if necessary. • Press the button. —> The “Setting the time zone and summer time” – “OFFSET:” menu is activated.
Example: Summertime support for the time zone of Germany (GMT + 1 hour) is in: If “S” is switched on, one hour is added in addition to offset (+01) during summer time. to set the time zone you live in (offset from -12 • Press hours to +12 hours). • Press the button to switch summer time support on (“S”) or off (“S” disappears). Saving settings • Press the M button. —> Back to “Selecting the cassette” A (page 17). —> The “new“ settings are saved permanently.
5.4.1.1 Adjusting the output levels of the channel strips In this menu you can set the output levels of the modulators of the channel strips “A” and “B” to the same value. Bx 4A OUTPUT: Modulator: Bx 4A CCIR Bx 4A S21 on Bx 4A on / off OUTPUT: HF-Level: 0 0 … –7 dB NORM: 5.5 FM OUTPUT: CCIR 5.5 FM / GB 6.0 FM ▶ Bx 4A ▶ S21 OUTPUT: Fine 0 –64 … +63 • Measure and note down the output level of the channel strip. • Save the settings by pressing the M button.
5.4.1.2 Settings for TV stations The following settings “Automatic picture format conversion”, “Teletext mode” and “Teletext subtitle page” are only relevant for TV stations. Automatic picture format conversion TV programmes are transmitted in DVB Standard in picture format 4:3 or 16:9. The cassette recognises these picture formats and prepares them automatically for all of the connected television sets (letterbox).
Adjusting the picture format If problems with the automatic picture format switchover (e.g. 4:3, 16:9, Letterbox) arise with the connected devices, you can switch “off” the Wide-Screen-Signaling (WSS) in this menu. Bx 4A Signaling: WSS-OUT: on on / off • Press to switch Wide-Screen-Signaling “on” or “off”. —> Pressing the button you return to the main menu (Setting the output channel/output frequency) (page 20). • Press the button.
Switching teletext mode off/on In this menu you can define whether the teletext of the channel set is transmitted or not. Bx 4A Teletext: OUTPUT: on on / off • By pressing the teletext mode can be switched “on” or “off”. —> Pressing the button you return to the main menu (Setting the output channel/output frequency) (page 20). • Press the button. —> The “Activating and entering teletext subtitle pages” – “SUBTITLE: TXT-Page:” menu is activated.
Setting the teletext standard In this menu you define the characters to display the languages. For the Western European languages set “West”; for Eastern European languages set “East”. Bx 4A SUBTITLE: TXT-Norm: • Press West West / East to set teletext standard “West” or “East”. • Press the button. —> The “Setting audio output” – “AUDIO-OUT: Dual …” menu is activated. Setting audio output In this menu you can swap the languages for TV channels with dual tone.
Setting the audio mode In this menu you can define whether the Mono, Stereo or Dual Tone signal from the MPEG data stream or the VPS Signaling (if available) is to be used. Bx 4A AUDIO-OUT: MPEG => Audiomode MPEG / VPS " • Press to switch over the data stream (“MPEG” / “VPS”). • Press the button. —> The “Setting the LNB oscillator frequency“ – “LNB-FREQ:” menu is activated (page 21). 5.4.1.3 Configuring the CA module This setting supports a menu, which is displayed on the television screen.
5.4.2 Decoding 2 stations with one CA module – This feature is only possible via channel strip “B”. – The settings not described below are the settings pertaining to channel strip “A”. ! Bx 4B on / off OUTPUT: Modulator: Bx 4B CCIR Bx 4B on OUTPUT: HF-Level: 0 … –7 dB 0 NORM: 5.5 CCIR 5.5 FM / GB 6.0 FM FM Bx 4B OUTPUT: S09 ▶ Bx 4B ▶ S09 OUTPUT: Fine 0 **) ◀/▶ Bx 4B Bx 4B LNB-FREQ: ◀/▶ Bx 4B INPUT: SR= 22000 ◀/▶ Bx 4B Bx 4B FREQ IN: -0.
Selecting the channel strip • Select channel strip “B” (page 18). Modulator operating mode —> Setting see page 19. Setting the TV standard of the output signal —> Setting see page 20. Setting the output channel / output frequency —> Setting see page 20.
Switching on decoding / Setting the input symbol rate The input symbol rate is not to be set if decoding is activated. —> Setting the input symbol rate see page 22. ◀/▶ Bx 4B Bx 4B LNB-FREQ: ◀/▶ Bx 4B LNB-FREQ: Data Tuner A f = 10600 MHz INPUT: Bx 4B SR= 22000 INPUT: CI at LINE A *) • To switch on the decoding press the button in the ”Setting the input symbol rate” menu. —> The display shows “INPUT:” “CI at LINE A”. The common interface of channel strip “A” is used for the decoding.
Switch off decoding ◀/▶ Bx 4B Bx 4B LNB-FREQ: ◀/▶ Bx 4B SR= 22000 LNB-FREQ: Data Tuner A f = 10600 MHz INPUT: Bx 4B INPUT: CI at LINE A *) • Press the button. —> The display shows “INPUT: and e.g. SR= 22000”. Continue with “Setting the input symbol rate” (page 22).
5.4.3 Setting time-controlled, alternative channels Channels can be switched on and off by means of a timer in this menu. Here, for the set “On Time“, a switch over occurs from channel strip “A“ (or “B“) to channel strip “a“ (or “b“); for the “Off Time“, from channel strip “a“ (or “b“) to channel strip “A“ (or “B“).) Bx 4a Das Erste Bx 4b QPSK-PAL S21 QPSK-PAL ZDF S09 button. • Press the —> The “Setting the switch-on time” – “TIMER: On Time” menu is activated.
Setting the switch-off time Bx 4a TIMER: Off Time ◀/▶ 23:00 • Use ◀ / ▶ to position the cursor under the digit (hours / minutes) to be set. • Press to set the desired switch-off time. • Press the button. —> The “Setting the days of the week” –“TIMER: Days” and e.g. “MTWTFSS” menu is activated.
6 Channel and frequency tables Kanal Channel Bildträgerfrequenz Picture carrier frequency [MHz] Kanal Channel Bildträgerfrequenz Picture carrier frequency [MHz] Kanal Channel Bildträgerfrequenz Picture carrier frequency [MHz] Kanal Channel Bildträgerfrequenz Picture carrier frequency [MHz] Kanal Channel Bildträgerfrequenz Picture carrier frequency [MHz] CCIR – Band I/III (Frequency raster 7 MHz) C C C S S S 48.25 55.25 62.25 112.25 119.25 126.25 S S S S S S 133.25 140.25 147.25 154.25 161.