Operation Manual

23
ENGLISH
CD MODE
------------------------------------------------------------------------------------------------------------
Changing the track selection
1 In stop mode, keep pressing »PROG.« until
the number of the track you want to replace
appears in the display.
2 Select the number of the new track by
pressing »SKIP
« or »SKIP «.
3 Press »PROG.« to save the new track.
Adding tracks
1 In stop mode, keep pressing »PROG.« until
the track number shown in the display is
zero.
2 Select the number of the new track by
pressing »SKIP
« or »SKIP «.
3 Press »PROG.« to save the new track.
Deleting the track memory
The CD must be in the stop position.
1 Press »OPEN/CLOSE« to open the CD
compartment;
or
press »CD TAPE/OFF RADIO« to
switch the device to »RADIO« or press
»CD TAPE/OFF RADIO« to switch the
device to »TAPE/OFF«.
Repeating a track (Repeat One)
1 During playback, press »MODE« once.
– The current track is repeated.
2 To quit the function, press »MODE« twice.
Repeating all tracks (Repeat All)
1 During playback, press »MODE« twice.
– The whole CD is played back repeatedly.
2 To end this function, press »MODE« once.
Creating a track memory
You can store up to 20 tracks of the current CD
in a particular order and then play them back. A
track may be stored more than once.
Programming is only possible in the stop position.
Selecting and storing tracks
1 Press »PROG.« to call up the function.
– Display: »0 I« for the track selection and
»
PROG.
•
« flash.
2 Select the track by pressing »
« or » «.
3 Press »PROG.« to save the track.
– The new memory position is briefly dis-
played, then »02« for the track selection
and »
PROG.
•
« flash.
4 To store more tracks, repeat steps 2 to 3.
Playing back a track memory
1 Start the track memory by pressing
»PLAY/PAUSE
e
II«.
– Playback begins with the first programmed
track.
2 Press »STOP
7
« to end playback.
3 To play the track memory again, press
»PROG.« and afterwards
»PLAY/PAUSE
e
«.