User manual

ENGLISH
11
Resetting the device
If malfunctions occur due to brief
mains overloads or static electricity
charges, reset the device. Any stored
settings are retained.
1 When the device is switched on,
press »RESET« on the base of the
device, for example, using a pa-
per clip.
Note:
7
If you wish to delete the stored
settings, pull out the mains plug
and remove the back-up bat-
teries. If you connect the mains
cable again after a short time,
all stored setting will have been
deleted.
3 Set the minutes with
»& TUNING %« and confirm
with »ALARM 1« or »ALARM 2«.
Setting the brightness
of the backlight display
1 Repeatedly press »DIMMER«
to change the brightness of the
display (3 levels) or switch of the
backlight.
Note:
7
In addition to this function, the
”AUTO DIMMER” ensures that
the brightness of the display is
adjusted to suit the brightness of
the surroundings.
Setting the colour of
the display backlight
1 Select the backlight colour
(8 colours) by repeatedly press-
ing »COLOUR«.
SETTINGS
_________________________________________