User manual

ENGLISH
13
Displaying the current
programme type
1 To display the current programme
type, press »RDS/WEC« twice.
– The programme type appears in
the display.
– If no programme type identifica-
tion is available, »NO PTY« ap-
pears.
Searching for programme
types (PTY)
This RDS function enables you to
search radio stations according to
programme type. A total of 31 pro-
gramme types have been defined.
1 Select the desired programme
type by pressing »RDS/WEC«
repeatedly until the desired pro-
gramme type is displayed.
2 To start the search in the desired
direction press »& TUNING %«.
– Display: »PTY« flashes.
– If the desired programme type
has been found, the corre-
sponding programme can be
heard.
– If the programme type could not
be found, »NO MATCH« appears
briefly in the display. The device
returns to the previous station.
Note:
7
The search can be interrupted
with »& TUNING %«.
RDS time synchronisation
Some RDS stations transmit an RDS
time signal. If the reception is good,
this time information will update the
time (display: »w« flashes), as long
as the time synchronisation is activat-
ed (see page 23). After successful
time synchronisation, »w« remains
constantly in the display.
Time synchronisation can take sev-
eral minutes, and even with good
reception the accuracy depends on
the time signal being transmitted. The
automatic setting is always activated
if the device is switched on from
standby to radio mode and a suit-
able RDS station can be received.
Radio text
The radio text is RDS information.
1 To call up radio text, press »RDS/
WEC«.
– The radio text (TEXT) appears in
the display as ticker text.
– If no radio text is available, »NO
TEXT« appears in the display.
RADIO MODE
___________________________________